Decal Removal / Application - Polaris WATERCRAFT Freedom Service Manual

Decal Removal / Application

1. Clean the original decal and surface with mild
detergent or household cleaner.
2. Take the new decal and align it with the old decal.
Using a felt--tip marker, outline at three or more points,
the position of the new decal.
3. Use a heat gun to soften the adhesive of the old decal.
WARNING: Use the heat gun on its lowest heat setting.
Do not heat the decal or hull for more than a second. Waiv-
ing the heat gun back and forth once is sufficient to soften
the adhesive. Prolonged heating will permanently damage
the hull.
Hull / Control Systems
6.21