Table of Contents
Advertisement
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
press D .
2. Press b ENTER.
3. Input a password and press b ENTER.
To change the password, press b ENTER when
the [Change] option is highlighted. Input a
password and press b ENTER. Enter it again and
press b ENTER to verify.
4. Press n HOME to exit the menu.
,
Note
If you forget your password, you can clear it
using the following steps:
1. Select the [Setup] menu on the [Home
Menu].
2. Input the 6-digit number "210499" and
press b ENTER. The password is cleared.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 44.
1. Select [Area Code] on the [Lock] menu then
press D .
2. Input a password and press b ENTER.
3. Select the first character using WS buttons.
4. Press b ENTER and select the second character
using WS buttons.
5. Press b ENTER to confirm your Area code
selection.
System Setting
29
3
Advertisement
Table of Contents
