Table of Contents
Advertisement
,
Note
y If a connected HDMI device does not accept
the audio output of the unit, the HDMI
device' s audio sound may be distorted or may
not output.
y When you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
- The connected device' s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or 576p),
1280 x 720p, 1920 x 1080i or 1920 x
1080p video input.
y Not all HDCP-compatible HDMI or DVI
devices will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
y If there is noise or lines on the screen, please
check the HDMI cable and use a higher
version cable than High Speed HDMI™ Cable.
>
Caution
y Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the unit and then turn it on again.
y When the HDMI connection with HDCP is
not verified, TV screen is changed to black or
green screen or the snow noise may occur on
the screen. In this case, check the the HDMI
connection, or disconnect the HDMI cable.
Video Connection
Connect the VIDEO OUT jack on the unit to the video
in jack on the TV using a video cable.
You can hear the sound through the system' s
speakers.
Unit
TV
Connecting
19
2
Yellow
Advertisement
Table of Contents
