Corega WLUSB2GO User Manual page 23

WLUSB2GO Manual
• Wireless mode: Select wireless network mode(speed)
- 802.11b/g mixed: Automatically detect 11b or 11g
- 802.11b only: Frequency only 11b
- 802.11g only: Frequency only 11g
• 11b/g Protection: In order to keep the connection stable,
please select [Auto] to automatically confirm which mode
the wireless network is in.
• TX Rate: Manually force the Transmit using selected rate.
Please accept the default setting.
• Tx-Burst: Ralink's proprietary frame burst mode. When it is
checked, transmit throughput will be improved.(Only work
when AP support this function. eg: coreag WLBARGMO)
- Enable TCP Window Size: Extend the Window size of
TCP.(When checked, the recieve speed will improve.)
- Fast Roaming at ___ dBm: It will enter romaing mode when
dBm reaches a level.
• CCX2.0: Open CCX(supports Cisco Compatible Extensions
function). Check it when AP supports Cisco.
- LEAP turn on CCKM: Open CCKM fuction (Cisco Key Man-
agement).
- Enable Radio Measurements:Open the function of CCK
Monitor AP Channel.
- Non-Serving Channel Measurements... : Select and start to
monitor if wireless channel is non-serving.
• Radio Off: Disable wireless radio wave.
• [Apply] : Click this when finish the settings.
22 22