目 錄 WLUSB2GS Manual ......................1.Preface ..................38 1.1 Features ..............38 1.2PackingContent ............1.3 Hardware description ..............1.4 Installation Steps .................. 40 2.SoftwareInstallation ..................44 3.Driver Installation 《InWindowsXPOS》 ........... 44 《In Windows 2000 OS》 ........47 ...............48 4.Verify the Hardware Status .................50 5.
Page 4
Before you start... Before you install the driver, please confirm if your OS were Windows 2000 SP4 (service pack 4) or Windows XP SP2 (service pack 2); For product safety and performance concern, please upgrade your OS to above mentioned version, then start your installation. If you can’t make sure your OS version, please click [My computer] and right click the mouse, then select [Properties].
Preface WLUSB2GS Manual corega WLUSB2GS is a Wireless USB Adapter which is suitable for all the laptop or desktop PCs with USB port. It supports Super G mode can peeds up to 108Mbps is faster than widely deployed IEEE 802.11b wireless networks found in homes, businesses, and public wireless hotspots around the world.
WLUSB2GS Manual 1.3 Hardware description Protection Cap LED Indicator 1. Link LED On: device working Off: device disable 2. Act LED On (Blink): network connected Off: network disconnected. 1.4 Installation Steps Please confirm the following steps before installing the product. Put on the Driver CD ...
Software Installation WLUSB2GS Manual 1. Please put Driver CD into CD-ROM. 2. Please select [English]. 3. Please select [Install Software]. 40 40...
Page 8
WLUSB2GS Manual 4. Click [Next]. 5. Please confirm the path, if no changes please click [Next]. 41 41...
Page 9
WLUSB2GS Manual 6. Please click [Next]. 7. When it appears below screen, please click [Continue Anyway]. 42 42...
Page 10
WLUSB2GS Manual 8. When it appears below screen on second time, please click [Continue Anyway]. 9. Finished, please choose [Yes, ]=>computer restart. (*Note: Restarting computer is a necessory step to ensure the product be installing successful.)
Driver Installation WLUSB2GS Manual Please plug corega WLUSB2GS into the USB port of the laptop or desktop PC. 《In Windows XP OS》 1. After restarting the computer, it will show up [Found New Hard- ware] screen, if not, please re-plug corega WLUSB2GS again.
Page 12
WLUSB2GS Manual 3. Driver Part I process is completed, please click [Finish] to continue. 4. It will start to install the drvier Part II, please select [ Install ]. => Click [Next]. the software automatically (Recommended) 45 45...
Page 13
WLUSB2GS Manual 5. When it shows up below screen, please click [Continue Anyway]. 6. Driver Installation is completed, please click [Finish] to finish. 46 46...
WLUSB2GS Manual 《In Windows 2000 OS》 1. When it shows up below screen, please click [Continue Anyway]. 2. When it shows up below screen, please click [Yes] to continue. 3. Now driver installation is completed, and you will see icon appears on system tray.
Verify the Hardware Status WLUSB2GS Manual 1. Oen the Control Panel=>Double click [System] 2. Click [Device Manager] from [Hardware tab]. (This screen is captured from Windows XP(SP2).) 3. Select and double click [CG-WLUSB2GS] 48 48...
Page 16
WLUSB2GS Manual 4. Verify the running status of the product is [This device is wrok- ing properly].=> Click [OK] to close the screen. 49 49...
Setting TCP/IP WLUSB2GS Manual 1. From the [Start Menu], select [Settings] => select [Control Panel]=>select [Network]=> press right button of the mouse, and select [properties]. 2. In [General] tab, Please select [Internet Protocol (TCP/IP)]=> click [Properties]. 50 50 50...
Page 18
WLUSB2GS Manual 3. Please select [General] tab => select both [Obtain an IP address automatically] and [Obtain DNS server address automatically] (Recommended) => click [OK]. 4. Return back to [Local Area Connection Properties] screen => click [OK] to close it. 51 51...
If there’s no icon appears on system tray, please press [Start] => [Programs]=>[corega CG- WLUSB2GS]=> [Wireless LAN Utility]. 2.You will see available AP listing in [Availabe WLANs] from Configuration tab.
Page 20
WLUSB2GS Manual 3. Please select one of available APs in listing => then press [Add] button, or double click the selection, => it will show up [Wirless Newtork Properties] screen, if the selection has configured with WEP/WPA encryption, please make the same setting as the AP.
WLUSB2GS Manual *Note: 1.You will see a icon on the left side of the device name when WLUSB2GS has connected with the device. 2.You may press icons to change the ranking of [Preferred WLANs], and you may click icon to fix one of them, =>then press [Apply] to save the changes.
Page 22
WLUSB2GS Manual 3.The device (AP) had added in the listing of [Preferred WLANs], =>press [Apply]...
Utility screen. If you can’t see icon on system tray, please press [Start] => [Programs]=>[corega CG- WLUSB2GS]=> [Wireless LAN Utility]. 7.1.2 Select one of available devices in [Availabe WLANs]. 7.1.3 Once shows up [Wireless Network Properties] screen, =>...
first get connected in [WPA Passphrase], and then press [OK] button. (d) When return back to [corega Wireless LAN Utility] screen, press [Apply] to save the changes. [WPA-Enterprise] (a) Authentication Mode: select [WPA-EAP(Enterprise)].
Page 26
WLUSB2GS Manual (c) Press [Authentication Config] button, it will show up follow- ing screen, => select [EAP-TLS], => press [OK]. screen, (d) When return back to [corega Wireless LAN Utility] press [Apply] to save the changes.
Utility Introduction WLUSB2GS Manual 8.1 Configuration This tab is for setting communication mode, ESSID, channel, and WEP encryption function. (1) Refresh: rescan available wireless devices. (2) Add:press this button will add the device which has been selected from [Available WLANs] to [Preferred WLANs], and in the meanwhile it will show up the prop- erties setting screen.
WLUSB2GS Manual (6) New: add a new available device in [Preferred WLANs]. (7) Remove: select one of devices from [Preferred WLANs], => then press [remove], it will be removed. (8) Properties: select one of devices from [Preferred WLANs], => press this button, then it will show up a [Wireless Network Properties] screen for you to modify.
WLUSB2GS Manual 8.3 Option This tab is for advanced setting. 8.4 About “About” tab shows the copyright, utility and driver version information. 62 62 62...
(1) First, please see following “FAQ” to check your problem. (2) Please go to http://www.corega-asia.com, then click “Supports”=>select “Online Customer Support” , => fill in the form, =>click “submit” . We’ll reply you as soon as possible.
Page 31
WLUSB2GS Manual supports=>download =>select “driver” , =>select and click the model which you want to upgrade. Q4. Windows can’t recognize WLUSB2GS. Ans: Please make sure that WLUSB2GS is inserted into the USB prot of your notebook or PC properly. 64 64 64...
Specification WLUSB2GS Manual Compliance Standard IEEE802.11/IEEE802.11b/IEEE802.11g LAN Interface USB1.1/2.0 Protocol CSMA/CA Transmission Method DS-SS, OFDM Network Type Infrastructure/802.11 Ad-Hoc Frequency Band 2400 ~ 2483.5MHz ISM band Channel 1~11 channels Transmission Rate IEEE802.11b: 11/5.5/2/1Mbps IEEE802.11g: 54/48/36/24/18/12/9/6Mbps Transmitter Output IEEE802.11b: Typical 16dBm Power IEEE802.11g: Typical 17dBm Coverage Area...
Page 33
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 34
Taiwan Inc. 7F., No. 10, Lane 345,YangGuang St. Nei-Hu Chiu, Taipei City 114, Taiwan R.O.C. TEL: +886-2-8751-9164 FAX: +886-2-8751-9174 PN: T30-CM8012-00 Rev.A...