BenQ G2200W User Manual page 9

4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the
front of the monitor.
Turn on the computer too, and follow the instructions in
Section 4: Getting the most from your BenQ monitor
on page 11
to install the monitor software.
Downloaded from ManualMonitor.com Manuals
How to assemble your monitor hardware 9