Table of Contents
Advertisement
Follow these instructions to install a 2.5" hard disk drive into 3.5" HDD Tray:
1.
Press the release button.
2.
Extend the locking lever.
3.
Pull the locking lever in the direction indicated to remove the HDD tray.
4.
Align the hard disk drive with the positioning screw on the HDD tray.
5.
Secure the hard disk drive with five screws.
6.
Reinsert the HDD tray into the slot and close the locking lever.
Front Side
2
3
1
4
System Hardware Installation
- 36 -
Rear Side
2
3
5
1
Advertisement
Table of Contents
