Table of Contents
Advertisement
Follow these instructions to install a 3.5" Hard Disk Drive:
1.
Press the release button.
2.
Extend the locking lever.
3.
Pull the locking lever in the direction indicated to remove the HDD tray.
4.
Align the hard disk drive with the positioning stud on the HDD tray.
5.
Slide the hard disk drive into the HDD tray.
6.
Reinsert the HDD tray into the slot and close the locking lever.
Front Side
2
3
1
5
System Hardware Installation
- 35 -
Rear Side
2
3
4
1
Advertisement
Table of Contents
