AEG L 87685 FL User Manual page 19

10.7 Starting a programme
with the delay start
1. Press button Startuitstel - Départ
Différé again and again until the
display shows the number of minutes
or hours of delay.
The related indicator comes on.
2. Press button Start/Pauze - Départ/
Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pauze - Départ/Pause
to start the appliance, you
can cancel or change the set
of the delay start.
10.8 Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pauze - Départ/
Pause to set the appliance to pause.
The related indicator flashes.
2. Press button Startuitstel - Départ
Différé repeatedly until the display
shows .
3. Press button Start/Pauze - Départ/
Pause again to start the programme
immediately.
10.9 Behaviour of the
appliance
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
10.10 Cancelling a running
programme
1. Press button Auto Off to cancel the
programme and to deactivate the
appliance.
2. Press button Auto Off again to
activate the appliance.
Now, you can set a new washing
programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.11 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button Start/Pauze - Départ/
Pause.
The related indicator flashes.
2. Change the function set.
3. Press the button Start/Pauze -
Départ/Pause again.
The programme continues.
10.12 Opening the door
If the temperature and level
of the water in the drum are
too high and the drum still
rotates you cannot open the
door.
While a programme or the delay start
operates, the appliance door is locked.
1. Press button Start/Pauze - Départ/
Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door.
3. Close the door and press button
Start/Pauze - Départ/Pause.
The programme or the delay start
continues.
ENGLISH 19