Table of Contents
Advertisement
When used, the digital speed is displayed in
the opposite unit to that shown in the analog
speedometer. If mph is used in the analog
speedometer, the equivalent speed in km/h
will be shown in the digital speedometer.
Related information
Displaying trip data in the instrument
•
panel (p. 91)
Resetting the trip odometer (p. 92)
•
Displaying trip statistics in the center dis-
•
play (p. 92)
Instrument panel (p. 84)
•
Changing system units of measurement
•
(p. 133)
2
The illustration is generic - details may vary according to vehicle model.
Displaying trip data in the
instrument panel
Data recorded and calculated by the trip
computer can be displayed on the instrument
panel.
This data is stored in a trip computer app. You
can choose which information the instrument
panel will display in the app menu.
Open and navigate in the app menu
hand steering wheel keypad.
App menu
Left/right
Up/down
Confirm
1.
Open the app menu in the instrument
panel by pressing (1).
(The App menu cannot be opened while
there is an unacknowledged message in
the instrument panel. The message must
be acknowledged by pressing the O but-
ton (4) before the App menu can be
opened).
2. Navigate to the trip computer app by mov-
ing left or right using (2).
> The top four menu rows show meas-
ured values for trip odometer TM. The
next four menu rows show measured
values for trip odometer TA. Scroll up or
down in the list using (3).
2
using the right-
DISPLAYS AND VOICE CONTROL
}}
91
Advertisement
Table of Contents
