Component Description - Scotsman TDE550 Service Manual

TDE550 & TDE650

COMPONENT DESCRIPTION

High Pressure Cut Out Switch: A manual reset
switch sensing the high side refrigeration pressure.
It is set to shut the machine off if the discharge
pressure should ever exceed 450 psig.
Evaporator: A vertical stainless steel tube,
refrigerated, and water filled. In it there is a
stainless steel auger.
Reservoir: Float operated, it maintains the water
level in the evaporator at a constant level, it also
contains the water level sensor.
Water Level Sensor: Senses if there is water in
the reservoir to make ice out of. Will shut the
machine off it there is none.
Ice Level Sensor: An electronic "eye", it senses
the presence of ice in the
bottom of the ice discharge
chute. Operates to turn the ice
machine on and off
ICE LEVEL SENSORS
automatically as the level of ice
WATER LEVEL
in the bin changes.
SENSOR
Drain Tube: When uncapped
EVAPORATOR
and lowered, drains the
evaporator.
Condenser: Air or water
cooled, where the heat
RESERVOIR
removed in ice making is
discharged.
Ice Storage Bin Assembly: A
plastic lined, insulated cylinder
that receives, stores and
dispenses the ice. Fresh ice
enters at the top, and when the
bin is full enough the ice will be
between the ice level sensors,
and the ice making will stop.
Ice is dispensed through a
chute at the bottom front when
the bin vane sweeps the ice
over the chute.
DRAIN TUBE
HIGH PRESSURE
CUT OUT
ICE STORAGE BIN
CONDENSER
TOUCH FREE SENSOR
August 1999
Page 10