Table of Contents
Advertisement
NS650
FOR THE INSTALLER
1. Is the ice system installed indoors in a
location where the air and water temperatures
are controlled, and where they do not exceed
the design limitations?
2. Is there an electrical service disconnect
within sight of the installed machine? Has the
voltage been checked, and compared to
nameplate requirements?
3. Have all the plumbing connections been
made and checked for leaks?
4. Has the machine been leveled?
LEVELED?
WATER
SUPPLY?
Final Check List
DRAINS?
December, 1988
5. Is there a minimum of 6" clearance at the
back and left sideof the machine for proper
service access and air circulation? (air cooled)
6. Is the water pressure a minimum of 20 psig?
7.Is the unit grounded?
8. Is there clearance over the top of the
machine for service access?
9. Is there a water shut off valve installed near
the machine?
10. Have all of the shipping blocks been
removed?
Page 6
POWER
SUPPLY?
Advertisement
Table of Contents
