Operation: Ice Vending - Scotsman NDE750 Service Manual

NDE750

OPERATION: Ice Vending

When the ice dispensing glass filler lever is
pushed, an electrical circuit is made to the ice
chute door solenoid causing the ice chute door to
open. At the same time power is connected to the
portion control module in the control box. That
module will energize the agitator drive motor for a
certain length of time, depending upon the setting
of the portion control knob.
The dispensing takes place when the agitator
sweeps the ice through the ice dispensing chute:
ice will continue to
discharge out this chute as
long as the agitator is
turning. It stops when the
agitator stops.
STORAGE BIN
AGITATOR
AGITATOR
DRIVE MOTOR
VEND SWITCH
GLASS FILLER
LEVER
SINK
December 1993
Page 14
ICE DISCHARGE CHUTE
DOOR
SOLENOID
ICE CHUTE
DOOR
ICE CHUTE