Introduction - Viper Maxi MK 2 Assembly & Operation Manual

1. Introduction

The Viper Maxi MK 2 Wire Rope Lubricator is an Australian designed and
manufactured lubricator for wire rope sizes from 50mm to 165mm. It provides fast
and effective single pass lubrication of wire ropes, eliminating the slow and arduous
task of manual lubrication. Lubrication of wire ropes with the Viper system provides
superior protection against corrosion and fretting wear by forcing lubricant into the
core of the wire rope while also coating the outer strands. The use of the Viper Maxi
MK 2 WRL improves operator safety and reduces the environmental impact of wire
rope lubrication for any size operation.
Key Features of the Viper Maxi MK 2 WRL Include:
1. The Collar is constructed from high grade aluminium with a high visibility
corrosion resistant coating.
2. The Viper Collar constructed of lightweight material and incorporates cast carry
handles for easier handling.
3. Unique polyurethane Seal design provides largest pressure contact area to ensure
maximum lubrication penetration.
4. Durable and wear resistant polyurethane Seals last thousands of metres in
normal service.
5. Seal and scraper size range to cater for rope sizes 50mm to 165mm.
6. Viper Maxi MK 2 Standard Kit:
• 45:1 grease pump delivers lubricant at up to 4,500 grams per minute and
pressure up to 5,000 psi.
Viper Maxi MK 2 High Flow Kit:
• High pressure high flow 50:1 grease pump delivers lubricant at up to 13,000
grams per minute and pressure up to 5,500 psi.
7. Global distribution network which provides local customer support.
Viper Maxi MK 2 Collar with Seals Inserted
www.viperwrl.com
Phone: +61 2 9636 5655
Assembly & Operations
Manual
3