Picture Adjustments; Fm Mode; Glossary - Philips MAGNAVOX Owner's Manual

P
ICTURE
A
DJUSTMENTS
button, then press the
T o adjust your TV picture
CH(annel)
controls, select a channel
select a control.
and follow these steps.
SETUP
EXIT
BRIGHTNESS
COLOR
PICTURE
F M
M ODE
Press the FM button on
F M
the remote control to
M ODE
select the FM mode. The
T his feature enables you to
current radio frequency
receive FM radio stations.
appears on the TV screen.
The radio frequency indicator
will move or shift while on the
TV screen during normal FM
mode operation.

FM Mode

• If you turn off the TV in FM mode, the TV will be in TV
mode when you turn on the TV again.
• You may get better FM reception by repositioning the TV.
• The TV's FM radio has a built-in antenna with a band
range of 88.0 ~ 108.0MHz.
• The radio frequency will not appear on the TV screen if
the volume is muted.
G
LOSSARY
Coaxial Cable - A single cable with a metal connector that screws (or pushes) direct-
ly onto a 75Ω jack (ANT(enna) In jack) on the Television or VCR.
Display - Allows the user to quickly confirm what channel number is being viewed
currently.
Jack Panel - The area on the back of the TV.
Menu - An on-screen listing of features that are available for adjustments.
On-screen Displays (OSD) - The wording or messages that help you set up features
(color adjustment, channel setup, etc.).
All manuals and user guides at all-guides.com
F
EATURES
Press the MENU
Press the VOL(ume)
B/{ buttons to adjust the
/ buttons to
selected picture control.
B
B
24 POWER TV/AUX
31
31
CH.
VOL.
CH.
STATUS/EXIT
1 2
4 5
7 8
FM 0
Press the CH(annel)
/ buttons until your
desired radio frequency
appears.
To exit FM mode and
return to TV mode, press
the FM button.
FM 88.0MHz
- 7 -
(C ' )
ONT D
Press the
STATUS/EXIT button.
SLEEP
BRIGHTNESS Press the VOL(ume) B/{ buttons
until the darkest parts of the picture are as bright as
you prefer.
VOL.
COLOR Press the VOL(ume) B/{ buttons to add
or reduce color.
PICTURE Press the VOL(ume) B/{ buttons until
the lightest parts of the picture show good detail.
3
SHARPNESS Press the VOL(ume) B/{ buttons
6
to improve detail in the picture.
9
TINT Press the VOL(ume) B/{ buttons to obtain
natural skin tones.
ALT. CH
POWER TV/AUX
CH.
VOL.
CH.
STATUS/EXIT
1 2
4 5
7 8
FM 0
Programming - Adding or deleting channels in the television's memory. The televi-
sion "remembers'' only the locally available or desired channel numbers and skips over
any unwanted channel numbers.
Remote Sensor - An area on the front of the TV through which remote control sig-
nals are received.
Twin Lead Wire - The two-strand 300Ω antenna wire used with many indoor and
outdoor antenna systems. In many cases, this type of antenna wire requires an addition-
al adaptor (or balun) in order to connect to the ANT(enna) In jack on the TV.
Volume Indicator - Appears on the TV screen when you adjust the volume.
S
MART
H
ELP
If you receive a
weak radio signal, you
SLEEP
may switch between the
internal (INT) or exter-
nal (EXT) antennas by
following the steps
below.
VOL.
1) Press the FM button
to exit the FM mode
and return to TV mode.
2) Press the MENU but-
3
ton.
6
3) Press the CH(annel)
/ buttons to select
9
SETUP. Then, press the
ALT. CH
VOL(ume) B or { but-
ton to continue.
4) Press the CH(annel)
/ buttons to select
FM ANTENNA. Then,
press the VOL(ume) B
or { button to select
INT or EXT.
5) Press the
STATUS/EXIT button.