Table of Contents
Advertisement
PR0930x4 3/1/02 10:21 AM Page 7
P
ICTURE
A
DJUSTMENTS
T
o adjust your TV picture
controls, select a channel
and follow these steps.
FM M
ODE
FM M
ODE
T
his feature enables you to
receive FM radio stations.
If you receive a weak radio signal, you may switch between the TV's internal and external
antennas. Usually, the internal antenna of the TV best allows you to receive FM stations.
To switch between the external (EXT) and internal (INT) antennas, follow these steps.
1) Press the FM button to exit the FM mode and return to TV mode.
2) Press the MENU button.
3) Press the CH(annel)
or
Then, press the VOL(ume) B or { button to continue.
4) Press the CH(annel)
or
Then, press the VOL(ume) B or { button to select INT or EXT.
5) Press the STATUS/EXIT button.
G
LOSSARY
Coaxial Cable - A single cable with a metal connector that screws (or pushes) direct-
ly onto a 75Ω jack (ANT(enna) In jack) on the Television or VCR.
Display - Allows the user to quickly confirm the current channel number.
Menu - An on-screen listing of features that are available for adjustments.
On-screen Displays - The wording or messages that help you set up features.
Programming - Adding or deleting channels in the television's memory. The televi-
sion "remembers'' only the locally available or desired channel numbers and skips over
any unwanted channel numbers.
F
EATURES
Press the MENU
button, then press the
B/{ buttons to adjust the
CH(annel)
or
button
selected picture control.
to select a control.
SETUP
B
EXIT
B
BRIGHTNESS
24
COLOR
31
PICTURE
31
Press the FM button on
the remote control to
/
select the FM mode. The
desired radio frequency
radio frequency appears on the
appears.
TV screen.
The radio frequency indicator
will move or shift while on the
TV screen during normal FM
return to TV mode, press
mode operation.
the FM button.
FM 88.0MHz
button to select SETUP.
button to select FM ANTENNA.
(C
'
)
ONT
D
Press the
Press the VOL(ume)
STATUS/EXIT button.
BRIGHTNESS Press the VOL(ume) B/{ buttons
CH.
until the darkest parts of the picture are as bright as
VOL.
VOL.
you prefer.
CH.
COLOR Press the VOL(ume) B/{ buttons to add
STATUS/EXIT
or reduce color.
PICTURE Press the VOL(ume) B/{ buttons until
1
2
3
the lightest parts of the picture show good detail.
SHARPNESS Press the VOL(ume) B/{ buttons
4
5
6
to improve detail in the picture.
7
8
9
TINT Press the VOL(ume) B/{ buttons to obtain
natural skin tones.
FM
0
ALT. CH
Press the CH(annel)
buttons until your
To exit FM mode and
POWER
1
4
7
FM
Remote Sensor - An area on the front of the TV through which remote control sig-
nals are received.
Twin Lead Wire - The two-strand 300Ω antenna wire used with many indoor and
outdoor antenna systems. In many cases, this type of antenna wire requires an
additional adapter (or balun) in order to connect to the ANT(enna) In jack on the TV.
Volume Indicator - Appears on the TV screen when you adjust the volume.
- 7 -
S
MART
H
ELP
If you turn off
the TV in FM mode, the
TV will be in TV mode
when you turn on the
TV again.
You may get better FM
reception by reposition-
ing the TV (when you
TV/AUX
SLEEP
are using the TV's
internal antenna).
The TV's FM radio has
a built-in antenna with a
CH.
band range of 88.0 ~
VOL.
VOL.
CH.
108.0 MHz. Radio sta-
tions may refer to this
STATUS/EXIT
number as their fre-
quency.
2
3
5
6
8
9
0
ALT. CH
Advertisement
Table of Contents
