Usage Tips; Cleaning And Maintenance - Remington Trim&Shape BKT-1000 Use And Care Manual

Usage Tips

Tr i m m i n g
Before Using Your Tr i m m e r
BKT-2000
Charge the unit for 14 hours before
first use.
Unplug the charging adapter from the
trimmer before using.
The BKT-2000 is a wet/dry trimmer, so
feel free to use it in the shower.
BKT-1000
Install 2 AAA alkaline batteries (See
"Inserting the batteries" above.)
The BKT-1000 is for dry use only. Avoid
using lotions before trimming.
!
Never use trimmer with damaged or
broken cutter units.
?
If the cutters do not move:
The cutting unit may be dirty and
clogged.Clean and lubricate the unit as
described on the next page.
8
Clean Your Groomer
Use the Thumb Wheel to set the trimmer R e g u l a r l y
comb to the desired length setting.It's a
Clean your trimmer regularly to ensure that
good idea to begin trimming at one of
the unit's operating life is not prematurely
the longest settings (4 or 5) to avoid
shortened.
accidentally trimming hair too short.As
you become familiar with the settings, Weekly
you can then select your desired length
setting.
Turn the unit on.
Place the flat top of the trimmer comb
against the skin.
Slowly slide the trimmer through hair.
Repeat from different directions as
necessary.
If hair builds up in the trimmer comb
during the trimming process,shut the
unit off,pull off the adjustable trimmer
comb and brush it off.
For an even closer look and precise
shaping,remove the adjustable trimmer
comb and trim the hairs along the outer
edge.
When you are finished,turn the trimmer
Cleaning cautions:
off, clean it,and return it to its storage
pouch.
Get other manuals https://www.bkmanuals.com

Cleaning and Maintenance

Oiling the Blades
Your trimmer is fitted with high-quality
stainless steel cutting blades,which
will remain permanently lubricated in a
dry environment. Your BKT-1000 will
never need oiling.
If you use your BKT-2000 in the sho w-
Turn trimmer off.
er or rinse it under running water, you
Remove the adjustable trimmer comb
will periodically need to add a drop of
attachment.(See
oil to the cutting blades to keep them
"Removing the
operating at peak performance.Simply
trimmer comb"
remove the adjustable trimmer comb
in the "How to
and place a drop of oil on the teeth of
Use" section
the cutter assembly.
above.)
Oil cautions
Push upward on
Use only the light-grade oil supplied
the cutter teeth
or a suitable alternative like sewing
to pop off the
cutter assembly. machine oil—these oils will not
Shake or blow evaporate and will not slow down
the blades.
out any accumulated hairs.
Do not use hair oil,grease,or any
If you have the BKT-2000,you may
oil mixed with kerosene or solvent,
also rinse it under running water.
as the solvent will evaporate and
leave the thick oil,slowing the
Do not use water on any part of the
blades.
BKT-1000.It is not water-tight.
Only the adjustable trimmer comb and Storage
cutter assembly may be removed from Always store this appliance and
the trimmers for cleaning. cord in a moisture-free area.
Cleaning should only be done with a Do not store it in temperatures
exceeding 140°F (60°C).
soft brush,such as the brush supplied
with the units. Do not wrap the cord around the
Do not use harsh or corrosive cleaners appliance.
on the units or their cutters. This appliance has no user service-
Do not apply pressure or hard objects able parts. For any other servicing
contact an authorized Remington
to cutters.
Do not disassemble cutter set. Service Center.
9