Advertisement
CF 18.0/230
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved
– Children shall not play with the appliance
– Cleaning and user maintenance shall not
be made by children without supervision
■ If the appliance is to be stored unused for
a long period, the batteries are removed.
■ The supply terminals are not to be short-
circuited
■ If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
Noise information
The noise values have been determined in
accordance with EN 62841. The evaluated
noise level of the power tool is typically:
– Sound pressure level L
– Sound power level L
– Uncertainty:
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
CAUTION!
Wear ear protection at a sound pressure above
85 dB(A).
Technical specifications
See figure B
Machine type
Battery
Weight of battery kg
Working time
Max. Air volume m³/h
Max Air Speed
:
70 dB(A);
pA
:
81 dB(A);
WA
K = 3 dB.
CF 18.0/230
Cooling Fan
AP
18.0/2.5
18.0/5.0
0.42
h
2.2
1095
m/
294
min
Overview (see figure A)
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Carrying handle
2
Adjustable head
3
Battery bay
4
Control switch
5
AC/DC socket
6
Hooks
7
Tripod mounting holes ( 15.87mm or
6.35mm)
8
Rod Pockets (2)
9
Key Holes (4)
10 Release button for battery
11 Li-ion battery
AC/DC adapter
12
Operating instructions
For further information on the manufacturer's
products go to www.flex-tools.com.
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cooling fan and check that there are no
missing or damaged parts.
The batteries are not fully charged on
AP
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
0.72
manual.
4.5
Inserting/replacing the battery
■ Make sure that the control switch 4 is in the
OFF position.
■ Press the charged battery 11 into the
power tool until it clicks into place. (see
figure C)
■ To remove, press the release button 10
and pull out the battery.
NOTE
WARNING!
NOTE
11
Advertisement
