NME1854 & FME2404
AIR COOLED CONDENSER MAINTENANCE
Clean each air cooled condenser. Use a vacuum
cleaner or coil cleaner if needed. Do NOT use a
wire brush.
A. Remove top panel.
B. Remove two screws, and unplug the fan motors
C. Pull fan motor assembly off of locating pins and
out of the unit.
D. Clean the condenser; reassemble by placing the
fan motor assembly onto the locating pins,
replacing the mounting screws, plugging the fan
motors back in, and replacing the top panel.
Reconnect power.
Clean or replace the air filters regularly.
Moving Parts Hazard.
Disconnect electrical
power before beginning.
LOCATING
PINS
January 2000
Page 20
CAP
SCREW
UNPLUG
LEADS
FAN MOTOR
ASSEMBLY