For The Installer - Scotsman FME2400R Service Manual

FOR THE INSTALLER

Installation Limitations:
This ice system is designed to be installed indoors,
in a controlled environment:
Air Temperature
(Not including the remote condenser)
Water Temperature
Water Pressure
Voltage
(Compared to the nameplate)
Operating the machine outside of the limitations is
misuse and can void the warranty.
Water Limitations:
An ice machine is a food manufacturing plant; it
takes a raw material, water, and turns it into a food
product, ice. The purity of the water is very
important in obtaining pure ice and in maximizing
product life. This is not intended as a complete
resource for water related questions, but it does
offer these general recommendations:
1. Check with a water treatment specialist for a
water test, and recommendations regarding filters
and treatment.
2. In most cases, the water used to make ice
should be filtered or treated, depending upon the
There is no one type of water filter that
water.
will be effective in all situations.
water test is important.
Min Max
0 0
50 F 100 F
0 0
40 F 100 F
20 PSIG 80 PSIG
-5% +10%
That is why a
January 1995
Page 3
NME1850R & FME2400R
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of UL, NSF, and CUL.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any part and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to change
without notice.
Typical Storage Bin - B90
1.25"
21.12"
Drain
3/4"
FPT