Removal And Replacement: Fans - Scotsman FME1200 Service Manual

NME950 & FME1200

REMOVAL AND REPLACEMENT: Fans

To Remove the Condenser Fan Motor
Assembly
1. Remove top panel.
2. Unplug the two fan motor wire leads from the
fan motors.
3. Remove the two hex head bolts from the top
end of the fan motor assembly.
4. Lift up and pull out the fan motor assembly.
5. Repair as needed.
6. To reassemble: Place the fan motor assembly
lower flange holes over the two allen head cap
screws in the base, and reinstall the hex head
bolts at the top of the assembly. Plug the fan
motors back in, and replace the top panel.
Electrical shock hazard.
Electrical shock can cause
personal injury.
Disconnect power before
beginning to service
components.
January 1995
Page 28