For The Installer: Specifications - Scotsman FM1202RL Service Manual

Single System RL

FOR THE INSTALLER: Specifications

The unit is designed to fit a variety of Scotsman
storage bins. See sales literature for more
information.
Installation Limitations: The remote low side is
designed for indoor installations only. The machine
must also be in a controlled environment where
the air temperature does not fall below 50
0
go above 100 F.
The water temperature must be between 40
0
and 100 F.
The electrical power supply must not drop below
-5% of the lowest nameplate voltage or go above
10% of the highest nameplate voltage.
SPECIFICATIONS:
Model Cabinet Size
FME1200RL 21"w x 27"h x 24"d
NME950RL 21"w x 27"h x 24"d
FM1202RL 21"w x 27"h x 24"d
NM952RL 21"w x 27"h x 24"d
FME1500RL 21"w x 27"h x 24"d
NME1250RL 21"w x 27"h x 24"d
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.U.L.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
0
F., or that have been altered in any way, including the
use of any parts and/or other components not
0
specifically approved by Scotsman.
F.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
System Refrigerant BTUH required
R-404A
R-404A
R-22
R-22
R-404A
R-404A
January 1997
Page 2
Voltage
8,000 208-230 Flaker
8,000 208-230 Nugget
8,000 208-230 Flaker
8,000 208-230 Nugget
8,000 208-230 Flaker
8,000 208-230 Nugget
Ice Type