Component Description - Scotsman FM1202 Service Manual

COMPONENT DESCRIPTION

Control Box: Contains the electrical controls that
operate the machine.
High Pressure Cut Out Switch: A manual reset
switch sensing the high side refrigeration pressure.
It is set to shut the machine off if the discharge
pressure should ever exceed 400 psig.
Evaporator: A vertical stainless steel tube,
refrigerated, and water filled. In it there is a
stainless steel auger.
Compressor: The refrigerant vapor pump.
Reservoir: Float operated, it maintains the water
level in the evaporator at a constant level, it also
contains the water level sensor.
Water Level Sensor: Senses if there is water in
the reservoir to make ice out of. Will shut the
machine off it there is none.
CONDENSER
ICE CHUTE
COMPRESSOR
AIR COOLED
CONTROL BOX
RESERVOIR
EXPANSION
VALVE
DRAIN
TUBE
ICE LEVEL
SENSORS
August 1993
Page 9
Ice Discharge Chute: Directs the ice produced
by the evaporator into the storage bin.
Ice Level Sensor: An electronic "eye", it senses
the presence of ice in the bottom of the ice
discharge chute. Operates to turn the ice machine
on and off automatically as the level of ice in the
bin changes.
Gear Motor: An oil filled, speed reduction
gearbox, driving the auger.
Drain Tube: When uncapped and lowered, drains
the evaporator.
Condenser: Air or water cooled, where the heat
removed in ice making is discharged.
Expansion valve: The refrigerant metering
device.
ICE CHUTE
HIGH
PRESSURE
CUT OUT
FM1202
WATER COOLED
CONTROL BOX
CONDENSER
EXPANSION
VALVE
RESERVOIR
ICE LEVEL
SENSORS