Philips S7887/82 Manual page 17

'Unplug for use' symbol
Charging in the charging stand (S7885 only)
- While the product charges, first the bottom
light of the battery status indicator flashes
and then lights up continuously. Next the
second light flashes and then lights up
continuously, and so on until the product is
fully charged.
- When the product is fully charged, all three
battery status indicator lights light up
continuously. After approx. 30 minutes, the
light goes out automatically.
5 After charging, remove the USB power source
from the power outlet and pull the small plug
out of the product.
The 'unplug for use' symbol flashes to remind you
to disconnect the USB power source from the
power outlet and remove the small plug from the
product before you switch it on.
1 Make sure that the product is switched off.
2 Put the small plug of the USB cable in the
charging stand.
3 Insert the USB plug into the USB power source
(not included).
4 Insert the USB power source into the power
outlet.
5 Put the product in the charging stand.
6 After charging, remove the USB power source
from the power outlet and pull the small plug
out of the product.
17
English