Table of Contents
Advertisement
Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Contact the local water utility to check the water hardness in your area. This is important with regard
to how much detergent and rinse aid to use.
Basic settings
Open the door. Press
"Welcome to your new ASKO dishwasher. This is a first time setup." is shown on the display. It
is important that you choose the right settings to ensure good dishwashing results.
Select setting with
or . Confirm selected setting with
Settings
1.
Language
2.
Rinse aid 0/1/2/3/4/5
Pre-selected at factory: 4
3.
TAB On/Off
Pre-selected at factory: Off
4.
Auto dose 0 ml - 40 ml
Pre-selected at the factory: 0 ml
(Off)
To change the chosen setting, see the chapter Settings.
Before washing for the first time
.
Select the language to be shown on the display.
By using rinse aid you will improve your drying result. You
will also achieve a better dishwashing result with glassware
and dishes.
The rinse aid dispenser can be adjusted between 0 (Off)
and 5 (High dose).
Activate this setting when using an all-in-one detergent that
contains rinse aid.
This setting reduces the rinse aid dose.
Activate this setting if you want to use automatic doses of
detergent.
The exact dose depends on which program is running. For
the Auto program, the dose also depends on how dirty the
dishes are.
.
7
Advertisement
Table of Contents
