Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Triplett TMP60
Summary of Contents for Triplett TMP60
- Page 1 5 Commonwealth Ave 5 Commonwealth Ave Woburn, MA 01801 Woburn, MA 01801 Phone 781-665-1400 Phone 781-665-1400 User Manual Toll Toll Free 1-800-517-8431 Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com TMP60 Dual Input Type J/K Thermometer...
- Page 2 Introduction Congratulations on your purchase of the Triplett TMP60 Digital Thermometer with J/K - type dual input. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service. Features Large backlit display shows any combination of T1, T2, T1- T2, plus MAX, MIN, AVG.
- Page 3 Meter Description Meter T1 Thermocouple input connector T2 Thermocouple input connector Function buttons (Hold, MAX/MIN, Set) Function buttons (Power, Enter,T1 T2 T1-T2, C-F-K) Battery compartment (rear)
- Page 4 Operation Connecting thermocouples This meter accepts one or two K or J-type thermocouples with spade lugs (sub-miniature type with one spade wider than the other). Plug the thermocouple(s) into the meter's thermocouple input jack(s). Measuring Press the button to turn on the thermometer on. After 1 second the thermometer will display the T1 reading in the upper display and the T2 reading in the lower display.
- Page 5 Data Hold Press the HOLD button to freeze the reading in the display. HOLD will appear at the top right of the display. Press the HOLD button again to return to normal operation mode. T1 T2 T1-T2 Press the T1 T2 T1-T2 button to cycle through the four display combinations.
- Page 6 Use the ▼ button to toggle between J and K. Press ENTER to save the setting. Press and hold the SET button for 3 seconds to return to the normal operating mode or press ENTER to move to the “SLP” setting (sleep mode). Set Sleep/Non-sleep mode The thermometer enables the sleep mode option by default where the meter will automatically shut off after 20 minutes of...
- Page 7 Use the arrow ▲ or ▼buttons to adjust the offset. The lower digits show the offset amount while the upper digits show the actual temperature with the offset applied. Press the ENTER button to store the value and move to the next parameter.
- Page 8 Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (1) one year from the date of purchase.
Need help?
Do you have a question about the TMP60 and is the answer not in the manual?
Questions and answers