Table of Contents
Advertisement
18
OPERATING INSTRUCTIONS
TO CHANGE TEMPERATURE DISPLAY:
DO THIS:
PRESS AND HOLD THE UP/DOWN
BUTTONS SIMULTANEOUSLY
FOR 3 SECONDS
YOU WILL SEE:
Your AC is capable of displaying temperature
in degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF:
DO THIS:
PRESS
ON/OFF BUTTON
YOU WILL SEE:
FAULT CODES:
If the display reads "HS", "AS", "ES", "CS" or
"OS", a sensor has failed. Contact your
Authorized Frigidaire Service Center.
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar with.
NOTE
The "Cool" circuit has an automatic 3 minute
time delayed start if the unit is turned o
and on quickly. This prevents overheating of
the compressor and possible circuit breaker
tripping. The fan will continue to run during
this time.
• There
is
a
2-Second
compressor shutting down when selecting
FAN ONLY. This is to cover the possibility
of having to roll through to select another
mode.
• The
control
will
temperature within 2 degrees Fahrenheit,
between 60°F and 90°F degrees.
• After
a
power
memorize the last setting and return the
unit to the same setting once power is
restored.
• The unit should be operated in an indoor
temperature range of 60°F - 90°F (16°C -
32°C), and an outdoor temperature range
of 64°F - 109°F (18°C - 43°C). Performance
may be reduced outside of these operating
temperatures.
delay
for
maintain
the
outage,
the
unit
the
set
will
Advertisement
Table of Contents
