Dvd Mode; Handling Discs; Cleaning Discs; Dvd - Features - Bush DLED32265DVDT2S Instruction Manual

Table of Contents

Advertisement

DVD MODE

Handling Discs

To keep the disc clean, only handle the disc
by its edge. Do not touch the surface.
Do not stick paper or tape on the disc.
If the disc is contaminated with any
substance like glue, remove before using it.
Do not expose the disc to direct sunlight
or heat sources such as hot air ducts, or
leave it in a car parked in direct sunlight as
the temperature can rise quickly and damage
the disc.
After playing, store the disc in its case.

Cleaning Discs

Before playing, clean the disc with a
cleaning cloth. Wipe the disc from the centre
out.
Do not use solvents such as benzine,
thinner, commercially available cleaners or
anti-static spray intended for vinyl LPs.

DVD - Features

DVD / CD / CD-R / CD-RW / MP3 / JPEG /
MPEG playback.
NTSC / PAL playback (according to disc
content).
LPCM audio via coaxial and optical digital
audio outputs (optional).
Multi-Audio (up to 8) support (according to
disc content).
Multi-Subtitle (up to 32) support (according
to disc content).
Multi-Angle (up to 9) support (according to
disc content).
8 level parental control.
Fast forward and rewind - 5 different speeds:
2x, 4x, 8x, 16x, 32x.
Slow motion playback - 4 different speeds:
1/2x, 1/4x, 1/8x, 1/16x forward.
Frame by frame forward playback.
Search Mode.
Repeat.
Coaxial audio output (optional).
Copied disks may be incompatible.
For any help concerning set up and use of your TV please call the Customer Helpline: 0345 604 0105

How to watch a DVD

NOTE: DVD mode cannot be accessed unless a
DVD is inserted or a DVD control button is pressed.
If you switch to another source by pressing
SOURCE, "
" or P+/P- buttons on the
remote control, DVD playback will be paused
automatically. You should press PLAY and
resume the playback manually when you switch
to DVD mode.
1. Switch on the TV.
2. Switch to DVD source using the "SOURCE"
button on the remote control.
3. Insert a disc into the loader.
The disc MUST be facing you when looking at
the TV screen.
Most discs will be automatically loaded and play
will start automatically if the disc does not have
any menus recorded on it.
If play does not start automatically, press the
play button "
" on the remote control, or the
play button "
/
" on the right side of the TV.
A menu may appear on the TV screen after a
few moments or the film may start immediately
after the Film/TV Company introduction. This
will depend on the disc content and may differ
on each disc.
NOTE: Steps 4 and 5 are only available
when a menu is recorded on the disc.
4. Press the navigation buttons "
" or "
" or the number button/s to select the
required title.
5. Press the OK button. The selected item starts
to play.

Notes on DVD Playback

a. No sound will be heard during Rapid advance
or Rapid reverse.
b. No sound will be heard during Slow motion
play.
" , "
" ,"
39

Advertisement

Table of Contents
loading

Table of Contents