Materials To Be Used - WAGNER W 180 Translation Of The Original Operating Instructions

W 180 P
Max. delivery rate:
Max. viscosity:
Max. pressure spikes: 150 bar
Power source:
Power consumption: 110 W
Round spray nozzle: 0.8 mm
Sound pressure level:*
Uncertainty K:
Oscillation level:*
Uncertainty K:
* Measured in accordance with EN 60745-1
Information about the oscillation level
The specified oscillation level has been measured according to a standard test
procedure and can be used to compare against electric tools.
The oscillation level is also for determining an initial assessment of the vibrational strain.
Attention! The vibration emission value can differ from the specified value when the
electric tool is actually in use, depending on how the electric tool is being used. It is
necessary to specify safety measures to protect the operating personnel. These measures
are based on an estimated shutdown during the actual conditions of use (all parts of the
operating cycle are taken into consideration here, for example periods when the electric
tool is switched off, and, when it is switched on but running without any load).

Materials to be used:

Paints and varnishes containing solvents, acrylic enamel paints, water-soluble varnishes,
glazes, polishes, wood preservatives, disinfectants, plant protectives, saturants, as well as
oils and other watery liquids.
The following spray substances are not suitable for use:
Dispersion and latex paints, materials containing strong abrasives, glazes with coarse
particles, strippers and caustic solutions, silicate paints. Use of these spray materials can
lead to increased wear or corrosion damage in the pump area, which are not covered by
the WAGNER-Guarantee.
Functional Description of the Spray Gun
The spray gun sucks in spray materials. The airless atomisation results when the spray material
is pumped at high pressure through the swirl system and the nozzle bore.
Technical Data
270 g/min
(runout time) 80 sec. Double insulation:
230 V, 50 hz
86 dB(A)
4 dB
10.5 m/s²
1.5 m/s²
Container capacity: 800 ml
Pump:
Pump cylinder:
Piston:
Weight:
Sound pressure
output:*
Uncertainty K:
GB
Replaceable
Special steel
Hard-chrome-plated
special steel Ø 5 mm
1.5 kg
99 dB(A)
4 dB
15