Doosan B22X-7 Operation & Maintenance Manual page 67

Operation Section
Traveling With or Without a load
When traveling with and without a load, travel with
the fork as low as possible, while still maintaining
good floor clearance height.
1. Carry the load as low as possible, while still
maintaining ground clearance.
2. Travel with the load uphill on upgrades and
downgrades.
3. For better vision, travel in reverse with bulky
loads.
Lift Truck Turning
1. When turning sharp corners, keep close to the
inside corner. Begin the turn when the inside
drive wheel meets the corner.
2. When turning in narrow aisles, keep as far from
the stockpile as possible when making a turn
into the aisle. Allow for counterweight swing.
NOTE: The MicroCommand control uses the steer
wheel angle signals to adjust drive motor
speeds to match the steering cramp angle.
With steer wheel cramp angles of 20° or
more, the MicroCommand control limits
drive motor speed to both drive motors.
Limiting motor speed when turning reduces
lift truck rotational speed while maintaining
traction and power to both drive wheels.
64