1. Safety Information 1.1 Fire Safety 1.2 Operating Safety 1.3 Service Safety 2. Technical Data 2.1 Screed Board Data 2.2 Machine Data 3. Storage 4. Replacement Parts 5. Assembly and Operation 6. Limited Warranty 7. How to Wet Screed 7.1 Set the Elevation of the Slab 7.2 Make Wet Slabs 8.
Page 3
Register Your Equipment Thank you for purchasing TOMAHAWK equipment! Your product is covered by the TOMAHAWK Warranty policy, but in order to activate your warranty, we need you to register your product. In addition to activating your equipment warranty, product registration will grant you access to important product updates, streamlined customer service and more.
Tomahawk Power. The information contained in this manual is based on machines in production at the time of publication. Tomahawk Power reserves the right to change any portion of this informa- tion without notice.
1.2.2 NEVER use accessories or attachments for this equipment, which are not recommended by TOMAHAWK POWER. Damage to the rammer and/or injury to user may occur.
1.3.2 ALWAYS replace worn or damaged components with spare parts designed and recommended by Tomahawk Power. 1.3.3 ALWAYS keep machine clean and labels legible. Replace all missing and hard-to-read labels. Labels provide important operating instructions and warn of dangers and hazards.
1.3.22 ALWAYS keep boards clean when not in use and guards in place and in working order. 2. Technical Data 2.1 Screed Board Data For more board sizes and bundle discounts, visit www.tomahawk-power.com. Boards are interchangeable with battery-powered models and gas-powered Honda model Tomahawk Screeds. Board Model...
3.4 Cover the screed and board completely with dry tarp. 4. Replacement Parts • For replacement parts and technical questions visit www.tomahawk-power.com or scan the QR code on the front of this manual. • Not all equipment components are available for replacement. The illustrations within this manual are a convenient reference to the location and position of parts in the assembly sequence.
Assembly and Operation 1 www.tomahawk-power.com Fit each side of the screed handles into the Fasten each side of the handles tightly using base of the screed assembly. a Size 5 Allen Wrench included. Place the lithium battery into it’s dock on top Secure the lithium battery securely on either of the screed’s motor.
Page 10
Assembly and Operation 2 www.tomahawk-power.com To attach the board, fit the bolts through the Align the bolts in the base to the holes in the back of the screed’s base. back of the screed blade and fit them through.
7. Limited Warranty Tomahawk Power LLC. ("We'' or "Us'') warrants to the original purchaser only ("You'' or “Your”) that the Tomahawk product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of 1 year from date of ourchase.
Page 12
Assumption of Risk You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instructions is at Your own risk. Governing Law This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state.
8. How to Wet Screed 8.1 Set the Elevation of the Slab 8.1.1 Use grade pins (A) to set the height of the slab. Position in the middle of the pour. 8.1.2 To set the elevation around the walls, use chalk lines or expansion joints.
9. How to Screed Form to Form 9.1 In order to screed form to form, the length of the blade should overlap both form boards on each side of the pour. 9.2 When screeding off of forms, keep the bottom of the blade as flat as possible. 9.3 Extend the life of your blade by using the lowest vibration setting in relation to the slump of concrete being used.
10. Operating on Wet Concrete 10.1 Steps 10.1.1 To begin, pour the concrete inside of the forms, slightly higher than the height of the forms themselves. 10.1.2 Place the screed on top of the concrete and start the engine. Do not begin screeding until the engine is warm and running on its own with the choke OPEN.
Page 16
Lose the manual pump and gain the power to spray 15,000 ft² in 10 minutes or less while maintaining constant, adjustable pressure from 50-435 PSI with your ideal concrete sealant, cure, top cast, form release, and more! Item #: TCS6.5 6.5 GAL MOTORIZED CONCRETE SPRAYER www.tomahawk-power.com...
Page 17
Perfect for concrete finishing of warehouses, decks, parking lots, and more, adjust from 0-28 degrees with 4 Combo hardened, tempered steel blades to achieve a matte, light gloss, or gleaming finish! Item #: JXPT46K 24” - 36” - 46” POWER TROWELS www.tomahawk-power.com...
3 Year Engine Warranty & 1 Year Product Warranty 3 Year Engine Warranty & 1 Year Product Warranty HAVE QUESTIONS? HAVE QUESTIONS? Contact us. We’re here to help! Contact us. We’re here to help! Email us at sales@tomahawk-power.com Email us at sales@tomahawk-power.com...
Page 19
1 Year Product Warranty 3 Year Engine Warranty & 1 Year Product Warranty 1 Year Product Warranty * All coupons in this manual are valid only for orders placed on www.tomahawk-power.com, unless otherwise noted. Coupon codes ASSEMBLED IN THE ASSEMBLED IN THE may only be used once per customer and may not be combined with any other offer.
Page 20
With same day shipping and faster delivery times, count on Tomahawk to keep you powered throughout the day! With long lasting parts and engines, Tomahawk equipment will be the star of your fleet for years to come. Visit www.tomahawk-power.com to get started today!
Need help?
Do you have a question about the eTVSA and is the answer not in the manual?
Questions and answers