Download Print this page
Lippert Curt 51189 Installation Manual

Lippert Curt 51189 Installation Manual

Advertisement

Quick Links

INSTALLATION MANUAL
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Parts List
Qty Description
1
Echo
manual override button
®
1
Reusable adhesive sticker
Tools Required
None
Maintenance
This button uses a CR2032 coin cell battery.
Periodic inspection should be performed
to ensure there is no visible damage.
Product Registration and Warranty
CURT stands behind our products with
industry-leading warranties. To get copies
of the product warranties, register your
purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
CURTMFG.COM
PRODUCT SUPPORT: 877.287.8634
WARNING
This device contains a battery composed of lithium, organic solvents and
other combustible materials. Improper handling of the battery could lead
to distortion, leakage, overheating, explosion or fire, causing personal injury.
Never swallow, charge, heat, expose to open flames, moisture or liquid.
Never attempt to disassemble, reverse the polarity or short circuit.
Product Photo
CAUTION
When disposing of used batteries, remove the batteries in advance. If not possible,
dispose entire product in a waste bin specific for electronics, as per the WEEE directive.
Follow any national or local regulations for battery disposal that apply to your area.
This button is not a toy. It contains small parts and accessories
that present a choking hazard. Keep away from children or pets.
Do not attempt to service this product.
NOTICE
Before you begin installation, read all instructions thoroughly.
All steps must be followed to ensure the product will function properly. Once installed,
test for proper function by using a test light or connecting a properly wired trailer.
Battery life will be shortened with heavy usage and / or use in extreme conditions.
Do not use product in temperatures below -4°F (-20°C) or above 129.2°F (54°C).
This button is rated as splash-proof only. Do not submerge or attempt to use under water
as this will result in irreversible damage that is outside our warranty coverage.
Clean with a damp cloth and do not use chemical or abrasive cleaning products.
51189-INS-RB
07/26/2023
Echo
Mobile Brake Controller (not included)
®
ECN10986
PAGE 1
51189

Advertisement

loading
Need help?

Need help?

Do you have a question about the Curt 51189 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lippert Curt 51189

  • Page 1 INSTALLATION MANUAL 51189 Level of Difficulty WARNING Easy This device contains a battery composed of lithium, organic solvents and other combustible materials. Improper handling of the battery could lead Installation difficulty levels are based on time to distortion, leakage, overheating, explosion or fire, causing personal injury. and effort involved and may vary depending on the installer level of expertise, condition of the Never swallow, charge, heat, expose to open flames, moisture or liquid.
  • Page 2 Step 1 Follow the instructions included with your Echo mobile brake controller on how to ® install the unit and pair it to the app. Once the Echo mobile brake controller ® is paired to your device, select open button. Select the 'Echo Manual Override ®...
  • Page 3 Step 3 After notification 'Pairing Successful' appears, select 'Next' to complete pairing. If the notification 'Device Not Found' appears, pairing was unsuccessful and you will need to repeat step 2. Step 4 To view the connection status, battery level and other details of the override button, select the 'Echo Manual Override ®...
  • Page 4 Step 7 To disconnect the override button, select 'Disconnect / Forget' button from the 'Echo ® Manual Override Button' status screen Step 8 Locate a suitable mounting location for the override button inside the vehicle. Clean the mounting surface prior to adhering the button. The override button comes with a reusable adhesive sticker on the base.
  • Page 5 Step 3 To change the battery, follow these steps: 1. Open the battery hatch by sticking your Echo manual override button to a surface and twisting it to the left. 2. Remove the old battery and replace it with a new CR2032 battery with the '+' side facing towards you.