Installing The Wired Remote Control; Installation - Samsung MWR-SH00 Instruction Manual

Installing the Wired Remote Control

Installation

Connect the power cables and communication cables of the
wired remote control to the terminal of ventilator PCB.
1
Open the wired remote control by using the groove on its top.
2 Secure the rear cover of the wired remote control to the wall
with 2 screws.
3 Connect the V1, V2 terminal of the wired remote control to the
V1, V2 terminal of the ventilator.
4 Connect the F3, F4 terminal of the wired remote control to the F3,
F4 terminal of the ventilator.
5 Reassemble the wired remote control.
MWR-SH00_IM_E_28133.indd 5
Wired
remote
control
Electrical wires
(Not supplied)
PCB
5
E-
2007-06-21 ｿﾀﾀ・10:48:36