Advertisement
NAT policies allow the flexibility to control Network Address
Translation based on matching combinations of Source IP
address, Destination IP address, and Destination Services.
Policy-based NAT allows you to deploy different types of NAT
simultaneously.
For configuration procedures and information regarding the
different types of NAT policies, such as Many-to-One, One-to-
One, or One-to-Many Load Balancing, refer to the SonicOS
Administrator's Guide.
Configuring a Stateful HA Pair
This section provides instructions for configuring a pair of Dell
SonicWALL SuperMassive 9600 appliances for Stateful High
Availability (HA). This section is relevant to administrators
following deployment Scenario B.
See the following sections:
•
Initial High Availability Setup, page 34
•
•
Configuring HA Monitoring Settings, page 35
•
Configuring Optional HA Settings, page 36
•
Configuring HA Advanced Settings, page 36
•
HA License Configuration Overview, page 37
•
Completing HA Pair Association, page 37
•
Verifying High Availability Setup, page 38
Configuring a Stateful HA Pair |
33
Advertisement
Chapters
