Parts Names; Front Panel - Sanyo MVP-85 Instruction Manual

PARTS NAMES

FRONT PANEL

1
POWER
This unit is not equipped with a power switch. The power is turned on/off when the supplied power cord is connected/disconnected at
the power source.
1
POWER indicator
2
Camera select buttons and camera indicators
Use these buttons to select the picture from the
corresponding camera. When a camera is selected, the
corresponding indicator will light.
3
STILL button and indicator
In live picture quad screen display mode, press this button
to set the freeze mode.
4
ZOOM button and indicator
In live picture quad screen display mode, press this button
to set the 2x zoom in mode.
5
SEQUENCE button and indicator
Press this button for an automatic sequential quad screen
or full screen display of the pictures.
6
QUAD button and indicator
In live picture mode, press this button repeatedly to switch
between quad screens A and B.
English
2
1 2 3 4 5 6
3 4 5 6 7 8 9
7 8
STILL ZOOM
EXIT NEXT
7
LIVE button and indicator
Press this button to select the live input mode.
8
VCR button and indicator
Press this button to select the VCR playback input mode.
9
MENU button (see page 7)
Press this button to display the menus. Press repeatedly to
select the different menus in order. Buttons 3 to 8 are
used for menu control.
F
ALL RESET button (see page 8)
G
MENU RESET button (see page 8)
3
F
ALL RESET
SEQUENCE QUAD LIVE VCR MENU
MENU RESET
G