Table of Contents
Advertisement
SPECIFICATIONS
Signal format
Camera signal input synchronization
Camera input terminals (CAMERA)
VCR input terminal (VCR IN)
VIDEO output terminal 1
(VIDEO OUT QUAD FULL)
VIDEO output terminal 2
(VIDEO OUT QUAD ONLY)
Control terminal (CONTROL)
•
Alarm input (1 – 8)
•
Remote input (RC)
•
Alarm output (AL)
•
Switching input (SW)
RS-232C terminal
Monitor on-screen display
Menu settings
Video alarm sensor
Back-up function
Operations
•
Still
•
2x zoom
Display automatic switching speed
Power
Consumption
Operating temperature range
Operating humidity range
Dimensions
Weight
Products are subject to change in design and specifications without notice and without incurring any obligation.
: Based on NTSC color signal standard
: Asynchronous
: VS/VBS, 1.0 Vp-p/75 , BNC connector x 8
: Composite input, VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Composite output: Quad screen/Full screen VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Composite output: Quad screen only VS/VBS, 1.0 Vp-p/75 , BNC connector x 1
: Push-type terminal
: No voltage, make-contact switch input x 8 (Low input)
: 2-wire type with resistance-based identification system, can be used with a remote control
circuit
: DC 5V, 5.7k (Low output)
: 1 low input, for switching signal from SW OUT of a timelapse VCR (as per this
manufacturer specifications)
: 9-pin D-SUB
: Title (up to 10 characters), date, time selectable
: 9 menus screens
: Internal, 8 channel (each camera input, selectable)
: Back-up for up to 30 days of the clock settings after connected for 30 hours continuously
: Available for camera live in quad screen, full screen and zoomed in picture
Can be set using a menu to operate automatically when there is an alarm trigger
: Available for camera live in quad screen
: 8 settings (1, 2, 3, 4, 5, 10, 20 and 30 seconds interval) available in full screen mode and
quad screen A and B
: AC 120 V, 60Hz
: 12 W
: 5 to 40˚C
: 10 to 80%
: 420 (W) x 44 (H) x 325 (D) mm
: Approx. 3.4 kg
32
English
Advertisement
Table of Contents
