Table of Contents
Advertisement
VCR PLAYBACK MODE
(VIDEO OUT QUADFULL)
Operations with the monitor connected to
the VIDEO OUT QUADFULL terminal.
VIDEO OUT
VCR
QUAD
1
2
FULL
3
4
QUAD SCREEN OPERATIONS
0 1 0 1
0 2 0 2
0 1
0 2
0 3 0 3
0 4 0 4
0 3
0 4
QUAD
FULL SCREEN OPERATIONS
0 4 0 4 0 4
1
2
3
4
5
SEQUENCE
0 1 0 1 0 1
0 2 0 2 0 2
0 3 0 3 0 3
Press the VCR button.
The VCR playback mode is selected. When a tape is played back, the recording of
the live pictures will be displayed on the monitor.
Refer to the diagrams below for the buttons to press in order to select the desired
QUAD
operation mode.
ONLY
If live pictures are recorded in full screen mode, playback will only be available in full
screen mode. Quad screen playback of such a recording is not possible.
Press the QUAD button.
The camera select indicators (1 – 4) light and quad screen A is displayed.
NOTE: It is not possible to switch to quad screen B of the recorded pictures.
Press a camera select (1 – 4) button.
The recorded pictures from the selected camera will be displayed full screen.
NOTE:
•
In full screen and quad screen modes, still and zoomed in image display modes
are not possible.
6
7
8
•
If the recording has been made using the quad screens (A and B) auto switching,
and if, for example, camera select button 1 is pressed, the display will switch
between the images from camera 1 and camera 5.
Full screen sequential display at 1 second interval
Press the SEQUENCE button.
The pictures are displayed sequentially at 1 second interval. The camera select
indicators (1 – 4) light sequentially according to the displayed camera.
NOTE:
•
The sequential display speed (image interval) is set in the (MONITOR SET) menu.
To change the sequence speed setting, refer to "FULL SEQ. TIMER" on page 22.
•
The sequential display speed (image interval) "FULL SEQ. TIMER T1" or "T2" can
0 4 0 4
be set for each camera in the (TIMER SET) menu.
14
English
Advertisement
Table of Contents
