Table of Contents
Advertisement
AXIS M5065 PTZ Network Camera
About events
•
Hardware
-
Network – Triggers an action rule if network connection is lost or restored. This can for example be used to
start recording to the SD card.
•
Input Signal
-
Manual Trigger – Triggers an action rule using the Manual Trigger button in the Live View page. See About the
controls in the live view window on page 11 . This can for example be used to validate actions during product
installation and configuration.
-
Virtual Inputs – Used by VMS (Video Management System) to trigger actions. Virtual inputs can, for example,
be connected to buttons in the VMS user interface.
-
Z-Wave – Triggers an action rule when the selected Z-Wave device changes state. This can for example be
used to turn on a light when a door opens.
•
PTZ
-
Moving – Triggers an action rule when the camera view moves due to a PTZ operation. This can for example
be used as an additional condition to prevent an action rule triggered by motion detection to record video
while the camera view moves due to a PTZ operation.
-
Preset Reached – Triggers an action rule when the camera stops at a preset position. This can be for example be
used with the Send Images action to upload images from the preset position.
-
Ready – Triggers an action rule when the PTZ functionality is ready to be used. This can for example be used to
steer the camera to a specific preset position when the product is started.
•
Storage
-
Disruption – Triggers an action rule if storage problems are detected, for example if the storage device is
unavailable, removed, full, locked or if other read or write problems occur. This can for example be used to
send maintenance notifications.
-
Recording – Triggers an action rule when the Axis product records to the storage device. The recording status
trigger can be used to notify the operator, for example by flashing LED lights, if the product has started or
stopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.
•
System
-
System Ready – Triggers an action rule when the product has been started and all services are running. This can
for example be used to send a notification when the product restarts.
•
Time
-
Recurrence – Triggers an action rule periodically. See How to set up recurrences on page 38. This can for
example be used to upload an image every 5 minutes.
-
Use Schedule – Triggers an action rule according to the selected schedule. See How to create schedules
on page 37.
About actions
You can configure several actions:
•
Overlay Text – Display an overlay text. See How to include overlay text in an action rule on page 22.
•
PTZ Control
-
Preset Position – Go to a preset position.
•
Record Video – Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure that
audio is enabled in the selected stream profile.
35
Advertisement
Table of Contents
