STERWINS 900WT24-4 Assemby - Use - Maintenance Manual page 202

FR
• Check the fault current protection switch and the protective
earth contact (earthing) for proper function at regular intervals
ES
• Check the power cord with mains plug for damage before every
PT
use. If the power cord is damaged, please arrange immediately
for the exchange by an authorized customer service or a skilled
IT
electrician.
•
EL
PL
• Do not use the power cord to carry/ transport the machine.
• Do not scrape the power cord across sharp edges and ensure
RU
that it does not get pressed.
KZ
• The voltage indicated on the type plate must correspond to the
voltage of the electrical source
UA
• Always plug the power cable to an earthed 220-240V 50Hz
RO
power supply protected by a minimum 10-amp fuse.
• Pollution of the liquid could occur due to leakage of lubricants
EN
• If the product is already assembled, please make sure that all
that you assemble it, please make sure upon opening the
package that all the elements needed for setting up the product
have been provided. If the product is damaged or has defects, do
not use it and take it back to the nearest store.
2.2 SYMBOLS ON THE PRODUCT
Complies with European standards: This symbol means that this appliance is compliant with
the applicable European directives, and a test of compliance with these directives has been
performed.
Single mark of circulation of products on the market of the Member States of the Customs
Union.
Ukrainian conformity marking
7
202