D Function Of Detergent - Brandt DSF13526W Instruction Manual

Remove the rinse reservoir cap by
lifting up the handle .
Close the cap after all.
Adjust ing t he rinse aid r eservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
Close the door and switch on the appliance.
Within 60 seconds after step 1, press the Program
and then press the Delay button to enter the set model, the rinse aid indication
blinks as 1Hz frequency.
Press the Program
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
Rinse aid level
button to select the proper set according to your using habits,
^
D1
D2
D3
D4
D5
Pour the rinse aid into the dispenser,
being careful not to overfill.
button more than 5 seconds,
^
Selector position
Soak Light bright
Glass Light bright
Glass, Soak Light bright
Light bright
ECO
ECO, Soak Light bright