Advertisement
SECTION 3
Using Your Brewer
Brewing Over Ice
Prepare Your Cup
Fill a 16 oz. plastic cup with ice. Do not use glass.
Remove the Drip Tray if necessary and place cup
under the Brew Head.
Choose Vue
Portion Pack
Make sure your Vue
features the Brew Over Ice Icon.
Lift the Brewer Handle, insert
the Vue
and lower the Brewer Handle.
Select Beverage Type & Size
Select the "Brew Over Ice" tab. The Touchscreen will
Coffee & Tea
Café
Brew Over Ice
display as pictured.
Iced Coffee
Strong
If making iced coffee, ensure "Iced Coffee" remains
Iced Tea/Other
Tea +
highlighted. If making iced tea or iced café drinks,
Iced Café
select the correct beverage type.
Select your beverage size using the + and - buttons
8
oz
at the bottom of the Touchscreen.
* Available sizes for Iced Café are 6 oz. and 8 oz.
Available Sizes*
Press
Do not remove mug or lift the Brewer Handle until "Enjoy!"
appears on Touchscreen.
Remove the Vue
The Vue
Allow it to cool completely before handling.
14
Cup
™
Cup
™
™
Cup into the Holder
& Enjoy!
™
Cup after brewing is complete.
Cup will be HoT after brewing. Use caution when removing.
™
What is a Cleansing Brew?
After brewing certain Vue
Cup portion pack varieties such
™
as hot cocoa, iced tea or a café beverage, we recommend
performing a cleansing brew to clear your Brewer of traces
of the previous beverage. It is an easy 3-step process:
Step 1 Take a used Vue
™
Cup and peel off the lid. Discard
the lid and any filter which adheres to it. Ensure
the empty Vue
™
Cup is clean.
Step 2 Place the EMPTY Vue
Cup in the Brewer and
™
place a mug on the Drip Tray.
Step 3 Lower the Handle and press "BREW." The Brewer
will dispense 8 oz. of hot water into your mug
and cleanse the Brewer. Once complete, discard
the water and carefully remove the Vue
The cleansing is complete.
Stopping the Brewing Process
If you need to stop the brewing process after it has started,
press and release the Power Button to turn the Brewer off.
The beverage flow will stop and the Brewer will shut off.
The Vue
Cup will be HoT after brewing. Use caution when
™
removing. Allow it to cool completely before handling.
To turn the Brewer back on, place an empty mug on the
Drip Tray and press the Power Button. Since the previous
brew was interrupted, some water may drip into the mug
during preheating.
We recommend that you perform a cleansing brew before
brewing your next beverage (see above). If this is not done,
the Brewer may deliver an additional amount of water for
your next beverage.
Dispensing Hot Water
If you need hot water for cooking (instant soup or oatmeal,
for example), place a cup or bowl below the Brew Head.
Place your cup or bowl as far back as possible. Lift and
lower the Handle WITHOUT inserting a Vue™ Cup. Select
"Coffee" (do not select "Strong") and press "BREW." The
Brewer will dispense hot water into your cup or bowl.
SECTION 3
Using Your Brewer
Step 1
Cup.
™
Step 2
Step 3
15
Advertisement
