Troubleshooting - HAMOKI PG-SA Instruction Manual

Troubleshooting

PROBLEM
Module plates are
NOT heating when the
power and heating
indicator are both on.
2. When the power is
on and temperature
controller is switched
and heating indicator
is on and temperature
can be not controlled.
3. Indicator is not on
when the power is on
and the heating
process is normal.
The indicator is out of
order when the power
is on.
The above are just for reference. If any serious fault occurs, please
cease using and turn to professional technicians for advice.
POSSIBLE CAUSES
1. Temperature
controller is broken.
2. At least one of
heating wires is burnt.
3. Temperature
protector is on.
1. Temperature
controller is out of
order.
1. Indicator is broken.
1. Abnormal power
supply or cut-off
power supply.
2. Fuse is burned.
SOLUTION
1. Change
temperature
controller.
2. Change the burnt
heating tube.
3. Dismantle the
bottom plate and use
hand to reset the
temperature
protector.
1. Change
temperature
controller.
1.Change
temperature
controller.
1. Check power supply
and connection to
make power supply
be normal.
2. Change fuse.
11