LG WD-1433RD Service Manual page 25

! "
SPIN TROUBLE
Check on the spinning, is the frequency of the
water level 248 or more? The frequency can be
checked by pressing the Rinse Hold and Spin
buttons at the same time on the program.
YES
When pressing Intensive, Rinse Hold and POWER
buttons at the same time after power off, press the
Start/Pause button 2 times, is the drum low speed
spin?
NO
Is it disconnected, or disassembled?
[White : 3pin( ), Red:3pin( ), Red:3pin( ),
Natural:4pin( )]
NO
Is it disconnected, or disassembled?
[White:3pin ( ), White:5pin ( )]
NO
Check the motor connector, Is the resistance of
the terminal same as the figure?
MOTOR TERMINAL (1)
Resistance of terminal:
YES
Replace the MAIN PWB ASSEMBLY
About 5 10
24
Check the sensor
(Pressure) or hose
NO
(Sensor). If the problem
is on the sensor or the
hose, replace the sensor
or the hose.
YES
Normal
YES
Correct the connector.
YES
Correct the connector.
Replace the STATOR
NO
ASSEMBLY
(4417EA1002D)