Table of Contents
Advertisement
Quick Links
USER MANUAL
Safety Precautions
• Finger or objects may get stuck when opening and closing door.
• Keep away from children.
• Do not hit edge of safe to avoid injury.
• Be careful when moving or installing safe to avoid any injury.
• Firmly fix safe to ground when installing. When moving safe,
inquire a professional if needed.
• Improper handling of safe can cause damage to floor or table.
• Avoid placing fragile objects, such as ceramic or glass, on safe.
They may fall and cause injury.
• Place safe on dry flat surface. Safe door may not close.
MC - 020
MC - 040
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LuCell MC-020
Summary of Contents for LuCell MC-020
- Page 1 USER MANUAL MC - 020 MC - 040 Safety Precautions • Finger or objects may get stuck when opening and closing door. • Keep away from children. • Do not hit edge of safe to avoid injury. • Be careful when moving or installing safe to avoid any injury. •...
- Page 2 Safe Overview 01 Main Body 02 Tray 03 Shelf (MC-40 only) 04 “S” Memory Button “B” (Not in use) “W” (Not in use) 05 Door Sensor 06 LED Light 07 Battery case 08 Alarm 09 Locking Bolts Keypad Overview 01 LCD Display 02 Touch Keypad 03 Touch START Button 04 Fingerprint Scanner...
- Page 3 SETTING YOUR PASSCODE User 1 Press “S” button “CodE” will be displayed. Open the door on the backside of the door And then ‘USEr_’ will be displayed. User 2 Press ‘1’, Enter new passcode “AgAin”, Enter new passcode “USEr_1” then press (4~20 digit), Then then ‘_____”...
-
Page 4: Delete Fingerprint
REGISTER FINGERPRINT Press “S” button Press ‘FIngEr’ Press ‘0’ Scan Open on the backside “SEt” will be “S” button will be to register fingerprint the door of the door displayed again shortly displayed fingerprint 2 times for 3 seconds (Maximum 10 fingerprints can be registered) DELETE FINGERPRINT Press “S”... -
Page 5: Usb Type-C Port
USB TYPE-C PORT In case the internal batteries have no more electricity, install 4 x AA Alkaline batteries into the portable battery pack. Insert the USB Type-C cable into the port to provide temporary power to open the door. Replace internal 4 x AA batteries immediately. USB Type-C Port HOW TO USE ALARM 1. -
Page 6: Security Mode
SECURITY MODE Press START button twice to hide passcode display. [Passcode displayed] [Passcode not displayed] Press “S” button Press Press “VoL” Press Open on the backside “SEt” will be “S” button “0” ~ “7” will be the door of the door displayed again twice to choose... -
Page 7: Troubleshooting
TROUBLE-SHOOTING Situation Possible Cause Measures No response when • Battery discharge • Replace Alkaline batteries START button pressed • Incorrect insertion of • Confirm correct insertion of batteries batteries • Keypad Lock mode ON • Press START for 3seconds to deactivate Leypad Lock mode •... - Page 8 Hotline: 6745 6800 email: enq@duro.com.sg www.lucell.sg...
Need help?
Do you have a question about the MC-020 and is the answer not in the manual?
Questions and answers