Using The Component Audio Video Input Jacks; Connecting A Dvd Player; Using The Audio Output Jacks; Connecting A Stereo Amplifier - Sanyo DP23625 Owner's Manual

USING THE COMPONENT AUDIO VIDEO INPUT JACKS

CONNECTING A DVD PLAYER OR
OTHER EQUIPMENT
Switch off TV and external equipment before
connecting cables. (Cables are not supplied.)
1
Connect a DVD Player or other equipment's
Component Video Out to the TV Component
Video In (Y-Pb-Pr) Jacks.
2
Connect the DVD Player's Audio Out to the
TV Component L/R Jacks.
3
Press POWER to turn on the TV. Turn on
external equipment also.
4
Press the INPUT key to select COMPO-
NENT3.
A solid Blue screen with COMPONENT3 displayed
means that the Video mode is selected, but no signal is
being detected at the Component jacks. Check connec-
tion, and turn on external equipment.

USING THE AUDIO OUTPUT JACKS

CONNECTING AUDIO OUT JACKS
TO A STEREO AMPLIFIER
Switch off TV and external equipment before
connecting cables. (Cables are not supplied.)
1
Connect the TV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
2
Press POWER to turn on the TV. Turn on
external equipment also.
Note: DO NOT connect external speakers directly
to the TV.
8
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
TV Back
) (
(
R
R
2
AV3
Y Y
L L Pb
Pb
R Pr
R Pr
AUDIO OUTPU T
L
R
TU NE R
VH F
UH F
CA TV
What you will need for
connections:
1
Component Video
Cable – 1
2
Audio Cable – 1
Press the INPUT key after connecting cables to access
the A/V Inputs. There is NO need to tune to a blank
channel.
TV Back
Pb
L
R
Pr
1
AU DIO OU TPU T
L
L
R
R
TU NE R
VH F
U H F
C AT V
1-800-877-5032
1
DVD Player
COMPONENT VIDEO OUT
Y C C
B R
VIDEO OUT SELECT
S
OPT.
S-VIDEO OUT COPONENT
R L
DIGITAL
OUT AUDIO OUT VIDEO OUT
Remote Control
POWER
INPUT RESET
1 2 3
1 2 3
4
3
What you will
need for
connections:
1
Audio Cable – 1
Stereo
Amplifier