Remove The Heat Sink - Lenovo Slim 7 Pro X Hardware Maintenance Manual

Figure 9. Remove the SSD
Go to
https://support.lenovo.com/partslookup
part:
Solid-state drive (SSD)

Remove the heat sink

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 32
Step 1. Loosen five screws and then remove the heat sink (for DIS) or loosen three screws and then remove
the heat sink (for UMA).
Figure 10. Remove the heat sink
Go to https://support.lenovo.com/partslookup
part:
Heat sink
36
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
to look up the Lenovo part number of the following replacement