Remove The Camera Rubber; Remove The Camera Cable - Lenovo Slim 7 Pro X Hardware Maintenance Manual

Remove the camera rubber

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 41
"Remove the hinge cover" on page 42
"Remove the hinge" on page 43
"Remove the strip cover" on page 43
"Remove the LCD panel" on page 44
Step 1. Remove the camera rubber.
Figure 23. Remove the camera rubber
Go to https://support.lenovo.com/partslookup
replacement parts:
Camera rubber
Removable tape

Remove the camera cable

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 41
"Remove the hinge cover" on page 42
"Remove the hinge" on page 43
"Remove the strip cover" on page 43
"Remove the LCD panel" on page 44
Step 1. Remove the camera cable.
46
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following