All manuals and user guides at all-guides.com Contents Introduction Warning Caution Important Information Attaching or Removing the Stand Installing Batteries to the Remote Control Identifying Front and Rear Panel Connection Suggestion Main Unit Description Remote Control OSD Basic Adjustment How Do I Clean The TV Troubleshooting Specifications FCC Compliance Statement...
All manuals and user guides at all-guides.com Introduction Thank you very much for purchasing your LED TV. It serves as a normal colour TV and a PC monitor. To enjoy your set fully from the very beginning, read this manual carefully and keep it handy for future reference.
All manuals and user guides at all-guides.com Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . This symbol is intended to alert the user to avoid the risk of electric shock.
All manuals and user guides at all-guides.com Caution Caution High voltages are used in the operation of this product. Do not open the product's casing. Refer servicing to qualified service personnel . Caution To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture do not place objects filled with liquids, such as vases, on the apparatus.
Page 6
All manuals and user guides at all-guides.com Caution Caution Never stand on, lean on or suddenly push the product or its stand. You should pay special attention to children. Caution Do not place the main unit on an unstable cart stand, shelf or table.
All manuals and user guides at all-guides.com Important Information Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
All manuals and user guides at all-guides.com Attacthing or Removing the Stand 1. To attach the base place the display unit flat on a table. 4 Afterwards attach the stand onto the bottom of the stand. Screw in the 5 screws to secure the stand.
All manuals and user guides at all-guides.com 2. To remove the stand, remove the 5 screws in the area and the stand will come off. Installing Batteries to the Remote Control Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside the battery compartment.
All manuals and user guides at all-guides.com Identifying Front and Rear Panel Front View INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns blue when the TV is turned on. Because of the LED in the panel, the TV might take 10 –...
All manuals and user guides at all-guides.com Connection Suggestions If You Have Digital Cable without Cable Box or Antenna… Make sure the power of HDTV is turned off. Connect the RF cable from your antenna or digital cable to the TV port on the back of your HDTV.
Page 12
All manuals and user guides at all-guides.com Connecting DVD Player with Component YPbPr… 1. Make sure the power of HDTV and your DVD player is turned off. 2. Obtain a Component Cable. Connect the green color connector to both your DVD player and YPbPr’s green connector port on the back of your HDTV.
Page 13
All manuals and user guides at all-guides.com Connecting Wii™ with Composite… Make sure the power of HDTV and your Wii™ is turned off. Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ and AV’s Yellow Video connector port on the back side of your HDTV. Obtain a RCA Audio Cable.
Page 14
All manuals and user guides at all-guides.com Connecting Cable or Satellite boxes with HDMI… 1. Make sure the power of HDTV and your set-top box is turned off. 2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the back of your HDTV.
Page 15
All manuals and user guides at all-guides.com Connecting to a PC with VGA and 3.5 mm minijack … 1. Make sure the power of HDTV and your PC is turned off. 2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other end to the VGA port on the back of your HDTV.
Page 16
All manuals and user guides at all-guides.com Connecting a Digital Audio Receiver with Coaxial... Make sure the power of HDTV and your receiver is turned off. Obtain a COAXIAL cable, connect it to your receiver’s COAXIAL digital input and the COAXIAL connection on the LINE OUT port on the back of the HDTV.
All manuals and user guides at all-guides.com Main unit description Control Panel Button Function VOL+ : Increase volume; if OSD is active, functions as right in the menu; in SOURCE menu, functions as ENTER. VOL- : Decrease volume; if OSD is active, functions as left in the menu. CH+ : Change channel up;...
All manuals and user guides at all-guides.com Remote control POWER: Power on/off button, press once to turn the TV on and press again to turn the TV off. MUTE: Press this button to mute or restore sound. MTS/AUDIO: When stereo program is received, press this key to switch sound system between mono and stereo.
Page 19
All manuals and user guides at all-guides.com Installation Guide Press MENU button to display the MAIN OSD MENU; Press button to select the MENU you want; Press ENTER button to enter the sub menu; Press button to select the option and then press to adjust the value in the sub menu;...
Page 20
All manuals and user guides at all-guides.com Press “c/d” button to select press the “Aspect Ratio” and “ e/f” button to select. select Press “c/d” button to “Noise Reduction” and press the “e/f” button to select. select Press “c/d” button to “Dynamic Contrast”...
Page 21
All manuals and user guides at all-guides.com Note: The b c d e f g function it is only available in USER mode. Press “c/d” button to select “MTS” and press the “e/f” button to adjust. Note: It is only available in ATV. Press “c/d”...
Page 22
All manuals and user guides at all-guides.com SETUP Press the “MENU” button to enter the OSD menu .Then press “e/f” button to select the “Setup” menu. 1. Press “d” button to select “OSD Language” and press the “e/f” button to select the OSD language which you desire.
Page 23
All manuals and user guides at all-guides.com (a). Press “c/d” button to select “Mode” the “e/f” button to adjust. (b). Press “c/d” button to select “Font Style” the “e/f” button to adjust. (c). Press “c/d” button to select “Font Size” the “e/f” button to adjust. (d).
Page 24
All manuals and user guides at all-guides.com a. Press “c/d” button to select “Audio Only” the “e/f” button to select “On” or “Off”. b. Press “c/d” button to select “Blue Screen” the “e/f” button to select “On” or “Off”. When select “On”, only listen sound and the screen is black; When select “Off” watch TV normally.
Page 25
All manuals and user guides at all-guides.com c. Press “c c /d” button to select “Time Zone” and press the “e/f” button to select time zone. d. Press “c/d” button to select “Daylight Saving Time” and press the “e/f” button to select “On”...
Page 26
All manuals and user guides at all-guides.com LOCK Press the “MENU” button to enter the OSD menu .Then press “e e /f” button to select the “Lock” menu. 1. Press “d” button to select “Enter Password” and press select digital button to enter. Note: The default password is “0000”...
Page 27
All manuals and user guides at all-guides.com c. Press “c c /d” button to select “Component” and press the “e/f” button to select “Block” or “Unblock”. Press “c/d” button to select “HDMI” and press the “e/f” button to select “Block” or “Unblock”.
Page 28
All manuals and user guides at all-guides.com Note: The item is available only when current stream has downloadable rating data. Press “c/d” button to select “Reset RRT” and press “ENTER/f” button to reset. Channel Press the “MENU” button to enter the OSD menu .Then press “e/f” button to select the “Channel”...
Page 29
All manuals and user guides at all-guides.com PC Setting Press the “MENU” button to enter the OSD menu .Then press “e/f” button to select the “Setup” menu. And then press “d” button to select “PC Setting” and press the ENTER/f “...
All manuals and user guides at all-guides.com How do I Clean the TV? IMPORTANT 1. The power cable has to be removed from the socket before cleaning the TV. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LED glass.
All manuals and user guides at all-guides.com Troubleshooting Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Problems Solutions Connect power cord correctly. Turn on power. NO PICTURE Connect video cable correctly.
Page 32
All manuals and user guides at all-guides.com Problems Solutions TV CHANNELS ARE Check your auto lock function’s settings inside the OSD. You may have locked up some channels but forgot BLOCKED about them. UNIVERSAL REMOTE This TV follows NEC’s universal remote code. Please check your hand book for NEC’s codes then apply CODE them.
Page 33
All manuals and user guides at all-guides.com Problems Solutions SWITCHING Different channels and inputs will sometimes have this effect because the channel signal’s own volume CHANNEL is already loud. There is no way remove this completely. The TV has an AUTO VOLUME LEVEL SOURCE CHANGES function that can combat this type of effect.
All manuals and user guides at all-guides.com Specifications Display panel Illustration Item Active Area / Screen Size Diagonal 29 inches t c e o i t Pixel Pitch 0.4845 (H) x RGB x 0.4845(V) um per one triad Max. of Pixels (Resolution) HD (1366 x 768 pixels) resolution Brightness 200 nits (Typical)
Page 35
All manuals and user guides at all-guides.com (2)Audio Sound Mode Music/Standard/ Movie/User/Sport 150Hz/500Hz/1KHz/5KHz/10KHz/Balance Speakers 6 watt per channel (3) General l a t Sleep timer Off/5mins/10mins/15mins/30mins/60mins/90mins/120mins/180mins/240mins 1360*768 @60 Hz (NATIVE) 1024*768@60 PC timing 800*600@60 640*480@60 720x400@70 (4)NTSC/ATSC Sound: Mono / Stereo / SAP Favorite Channel NTSC V-chip...
All manuals and user guides at all-guides.com FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: This device may not cause harmful interference This device must accept any interference received, including interference that my cause undesired operation.
Page 37
All manuals and user guides at all-guides.com MANUEL D’UTILISATION PLED2963A-B...
Page 38
All manuals and user guides at all-guides.com Dépannage Table des matières Introduction Avertissement Attention Informations importantes Fixation ou enlèvement du support Installation des piles dans la télécommande Identification des panneaux avant et arrière Suggestion de connexion Description de l'unité principale Télécommande Réglage de base de l’écran Comment nettoyer le téléviseur...
Page 39
All manuals and user guides at all-guides.com 1. Introduction Nous vous remercions d’avoir fait l’acquisition de ce TV LED. Il fait à la fois office d’un TV couleur classique et d’un moniteur PC. Pour bénéficier pleinement de votre TV dès le début, lisez attentivement ce manuel et conservez-le à...
Page 40
All manuals and user guides at all-guides.com 1.2 AVERTISSEMENTS PRECAUTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR PRECAUTION: POUR EVITER LE RISQUE DE CHOC ELECTRIQUE. NE PAS ENLEVEZ LE COUVERCLE (OU DOS). AUCUNE PARTIE UTILISATEUR SERVICEABLE A L’INTERIEUR. REFERENCEZ LA MAINTENANCE AU PERSONNEL DE MAINTENANCE QUALIFIE.
Page 41
All manuals and user guides at all-guides.com 1.3 PRECAUTIONS Précaution Des hautes tensions dangereuses existent l'int rieur de cet appareil. Ne pas retirer l'arri re du bo tier de votre appareil. Pour toute r paration, veuillez faire appel un technicien qualifi . Précaution Pour viter tout incendie ou choc lectrique, n'exposez pas l'unit principale...
Page 42
All manuals and user guides at all-guides.com 1.4 Précautions Précaution Ne montez jamais sur le t l viseur, ne vous appuyez pas dessus et ne le poussez pas brusquement de son socle. Pr tez particuli rement attention aux enfants. Précaution Ne placez pas le t l viseur sur un chariot, une tag re, ou une table instable.
Page 43
All manuals and user guides at all-guides.com Dépannage Informations Importantes Informations Importantes Protection de la connexion de l’antenne de télévision Mise à la terre de l'antenne externe de télévision En cas de connexion de l'appareil à une antenne extérieure ou un système de télévision par câble, assurez-vous que ces derniers sont mis à...
Page 44
All manuals and user guides at all-guides.com Dépannage Fixation ou enlèvement du support Fixation ou enlèvement du support Informations Importantes Pour fixer la base, placez l'unité d'affichage plate sur une table. Ensuite, fixez le support au fond du support. Vissez les 4 vis pour fixer le support.
Page 45
All manuals and user guides at all-guides.com Identification des panneaux avant et arrière Identification des panneaux avant et arrière Fixation ou enlèvement du support Informations Importantes Vue avant LAMPE TÉMOIN - La lumière est rouge lorsque l'appareil est branché, mais le téléviseur n'est pas allumé.
Page 46
All manuals and user guides at all-guides.com Veuillez insérer deux piles AAA dans la télécommande. Assurez-vous que vous faites correspondre les symboles (+) et (-) sur les piles avec les symboles (+) et (-) à l'intérieur du compartiment des piles. Ensuite, remettez en place le couvercle du compartiment des piles. Veuillez noter : •...
Page 47
All manuals and user guides at all-guides.com Identification des panneaux avant et arrière Fixation ou enlèvement du support Informations Importantes Suggestions Suggestions de connexion de connexion Pour la câblodistribution numérique sans boîte de jonction ou antenne ... Assurez-vous que l’alimentation du téléviseur HD est coupée. Branchez le câble RF à...
Page 48
All manuals and user guides at all-guides.com Connecter le lecteur DVD avec YpbPr composant… 1. Assurez-vous que l alimentation du t l viseur HD et de votre lecteur DVD est coup e. 2. Procurez-vous un c ble composant. Branchez le connecteur de couleur verte la fois votre lecteur DVD et au port du connecteur vert de l YPbPr l arri re de votre t l viseur HD.
Page 49
All manuals and user guides at all-guides.com Connexion Wii™ avec composite… Assurez-vous que l’alimentation du téléviseur HD et votre Wii™ est éteinte. Procurez-vous un câble vidéo jaune. Branchez le connecteur vidéo jaune à la fois à votre Wii™ et au port du connecteur vidéo jaune de l’AV à l’arrière de votre téléviseur Procurez un câble audio RCA.
Page 50
All manuals and user guides at all-guides.com Connexion du récepteur câble/satellite avec HDMI ... 1. Assurez-vous que l’alimentation du téléviseur HD et de votre boîtier décodeur est coupée. 2. Branchez un câble HDMI à la sortie HDMI de votre boîtier décodeur et l'autre extrémité...
Page 51
All manuals and user guides at all-guides.com Connexion à un ordinateur avec VGA et mini-prise de 3,5 mm... 1. Assurez-vous que l’alimentation du téléviseur HD et de votre ordinateur est coupée. 2. Procurez-vous un câble VGA D-Sub à 15 broches ; connectez-le à la sortie VGA de votre ordinateur et l'autre extrémité...
Page 52
All manuals and user guides at all-guides.com Connecter un récepteur audio numérique avec un coaxial ... Assurez-vous que l’alimentation du téléviseur HD et de votre récepteur est coupée. Procurez-vous un câble coaxial , connectez-le à l'entrée numérique coaxiale de votre récepteur et la liaison coaxiale au le port de SORTIE à...
Page 53
All manuals and user guides at all-guides.com 2.2 Vue générale 2.3.1. Panneau avant VOL- :Pour baisser le volume VOL+ : Pour augmenter le volume CH- : Permet d’accéder à la chaîne précédente CH+ : Permet d’accéder à la chaîne suivante MENU : Permet d’afficher le Menu principal des réglages SOURCE : Permet de sélectionner la source d’entrée POWER : Appuyez pour mettre en marche et éteindre la TV ou mettre en veille.
Page 54
All manuals and user guides at all-guides.com Télécommande POWER (MARCHE/ARRÊT) : Appuyez le bouton de mise en marche/arr t une fois pour allumer le t l viseur et appuyez de nouveau pour l' teindre. MUTE (SOURDINE) : Appuyez sur ce bouton pour mettre en sourdine ou r activer le son.
Page 55
All manuals and user guides at all-guides.com Réglage de base de l’écran Guide d’installation Appuyez sur le bouton MENU pour afficher le MENU OSD PRINCIPAL ; Appuyez sur le bouton pour s lectionner le MENU d sir ; Appuyez sur le bouton ENTER (ENTR E) pour acc der au sous-menu ;...
Page 56
All manuals and user guides at all-guides.com Appuyez sur le bouton pour s lectionner Aspect Ratio de l'image ), puis ( Format appuyez sur le bouton e/f pour s lectionner. Appuyez sur le bouton pour s lectionner Noise Reduction ( R duction de bruit ), puis appuyez e/f pour sur le bouton...
Page 57
All manuals and user guides at all-guides.com e. Appuyez sur le bouton c/d pour s lectionner 5K Hz . Appuyez sur le bouton e/f pour s lectionner. Appuyez sur le bouton c/d pour s lectionner 10K Hz . Appuyez sur le bouton e/f pour s lectionner g.
Page 58
All manuals and user guides at all-guides.com 3. Appuyez sur le bouton « c/d » pour sélectionner « Daylight Saving Time » (« Heure avancée »), puis appuyez sur le bouton « e/f » pour sélectionner « On » (activer) or « Off » (désactiver).
Page 59
All manuals and user guides at all-guides.com a. Appuyez sur le bouton c/d pour s lectionner CC Mode ( Mode de sous-titrage ), puis appuyez sur le bouton e/f pour r gler. b. Appuyez sur le bouton c/d pour s lectionner Analog CC ( Sous-titrage analogique ), puis appuyez sur le bouton e/f pour r gler.
Page 60
All manuals and user guides at all-guides.com Remarque: L'étiquette source est Créer des étiquettes pour les appareils connectés à votre téléviseur. 6. Appuyez sur le bouton « c c /d » « Other pour sélectionner Settings » ( Autres r glages ), puis appuyez sur le bouton ENTER/ ( ENTR E/f )
Page 61
All manuals and user guides at all-guides.com a. Appuyez sur le bouton « c/d » pour sélectionner « Menu Language » ( Langue du menu ), puis appuyez sur le bouton e/f pour s lectionner la langue. b. Appuyez sur le bouton « c/d » pour sélectionner « Go to next step » ( Passer l' tape suivante ), puis appuyez sur le bouton ENTER/f ( ENTR E/f ) pour acc der l' tape suivante.
Page 62
All manuals and user guides at all-guides.com g. Appuyez sur le bouton « c/d » pour sélectionner « Air/Cable » ( Antenne/C ble ), puis appuyez sur le bouton e/f pour s lectionner Air ( Antenne ) ou Cable ( C ble ). h.
Page 63
All manuals and user guides at all-guides.com 2. Appuyez sur le bouton pour s lectionner Change Password ( Changer mot de passe ), puis appuyez sur le bouton ENTER/ ( ENTR E/ ) pour r gler la valeur. Si le mot de passe est chang , tous les mots de passe dans le menu changeront en m me temps. Remarque : Si vous oubliez votre mot de passe, vous pouvez utiliser 1470 pour...
Page 64
All manuals and user guides at all-guides.com pour sélectionner « PC » ( Ordinateur ), puis appuyez sur le bouton pour s lectionner Block (Bloquer) or Unblock (D bloquer). 5. Appuyez sur le bouton c c /d pour s lectionner US Rating ( Classifications tats-Unis ), puis appuyez sur le bouton ENTER/f ( ENTR E/f ) pour acc der au sous-menu.
Page 65
All manuals and user guides at all-guides.com Remarque : L' l ment est disponible uniquement lorsque le flux actuel poss de des donn es de classification t l chargeables. Appuyez sur le bouton c/d pour s lectionner Reset RRT ( R initialiser RRT ), puis appuyez sur le bouton ENTER/f ( ENTR E/f ) pour r initialiser.
Page 66
All manuals and user guides at all-guides.com Paramètres d'ordinateur Appuyez sur le bouton MENU pour acc der au menu OSD . Ensuite, appuyez sur le bouton pour s lectionner le menu Setup ( Configuration ). Appuyez sur le bouton d pour s lectionner PC Setting ( Param tres d'ordinateur ), puis appuyez sur le bouton ENTER/ ( ENTR E/...
Page 67
All manuals and user guides at all-guides.com Dépannage Nettoyage du téléviseur IMPORTANT 1. D branchez l'appareil de la prise murale avant de proc der au nettoyage. 2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LED glass.
Page 68
All manuals and user guides at all-guides.com Dépannage Dépannage Le tableau suivant contient les probl mes communs et les solutions ces probl mes. Veuillez consulter cette liste avant de contacter les techniciens. Problèmes Solutions Branchez le cordon d'alimentation correctement. Mettez sous tension. PAS D'IMAGE Branchez le c ble vid o correctement.
Page 69
All manuals and user guides at all-guides.com Problèmes Solutions LES CHA NES de V rifiez les param tres de votre fonction de verrouillage automatique dans l'OSD. T L VISION sont Vous avez peut- tre verrouill quelques cha nes, mais en avez oubli . BLOQU ES CODE POUR Ce t l viseur fonctionne d apr s le code pour t l commande universelle NEC.
Page 70
All manuals and user guides at all-guides.com GRANDE BOITE Vous avez activ le sous-titrage et vous utilisez TE TE1 - TE TE4. Changez le NOIRE AU r glage CC1 ou d sactivez le sous-titrage et la bo te dispara tra. MILIEU D EL ECRAN Problèmes...
Page 71
All manuals and user guides at all-guides.com Spécifications Dépannage Spécifications Panneau d'affichage Illustration Point Taille de la zone active / de Diagonale de 29 pouces l'écran Format Écran large 16:9 Distance entre pixels 0,4845 (H) x RVB x 0,4845 (V) um par une triade Max.
Page 72
All manuals and user guides at all-guides.com (2) Audio Mode audio Musique / Standard / Cinéma / Utilisateur / Sport Contrôle automatique du volume Tonne 150 Hz / 500 Hz /1 KHz / 5 KHz/ 10 KHz /Balance Sortie SPDIF Oui (coaxial) Haut-parleurs 6 watts par chaîne...
Page 73
All manuals and user guides at all-guides.com Dépannage Déclaration de conformité FCC Déclaration de conformité FCC Ce dispositif est conforme la partie 15 de la r glementation FCC. Le fonctionnement est soumis aux conditions suivantes : Cet appareil ne doit pas g n rer d'interf rences nuisibles Cet appareil accepte toute interf rence re ue, y compris les interf rences qui peuvent perturber son fonctionnemen.