Rack Positions; Replacing Oven Lamp - Faber FBO FERVIDO 600BK User Manual

Rack Positions

Rack 4
Rack 3
Rack 2
Rack 1
Installing and removing wire racks
To install wire racks; reverse the procedure for removing wire rack.

Replacing Oven Lamp

WARNING: To avoid electric shock, ensure that the appliance circuit is
open before changing the lamp. (having circuit open means power is off)
First disconnect the power of appliance and ensure that appliance is cold.
help you in turning.
Then remove the lamp by turning, install the new lamp with same
Reinstall glass protection, plug the power cable of appliance into electrical
socket and complete replacement. Now you can use your oven.
Type G9 Lamp
It is important to place the wire grill into
the oven properly. Do not allow wire rack to
touch rear wall of the oven. Rack positions
a deep tray or a standard tray in the lower
and upper wire racks.
220-240 V, AC
15-25 W
Figure 13
Type E14 Lamp
32
220-240 V, AC
15 W
Figure 14