Table of Contents
Advertisement
60 cm Built-In Oven Installation And Mounting
Place of use for product must be located before starting installation.
Carry the product with minimum two people. Do not drag the product so
Remove all transportation materials inside and outside the product.
Remove all materials and documents in the product.
Installation Under Counter
A clearance must be provided at the rear part of the cabin as indicated
After mounting, the clearance between lower and upper part of the
be covered.
Installation In An Elevated Cabinet
at the rear part of cabin, upper and lower sections so that necessary
ventilation can be achieved.
Installation Requirements
Furniture surfaces for mounting and mounting materials to be used
must have a minimum temperature resistance of 100 °C.
Mounting cabin must be secured and its floor must be plane for product
not to tilt over.
Cabin floor must have a minimum strength that would handle a load of
60 kg.
Placing And Securing The Oven
Place the oven into the cabin with two or more people.
17
Advertisement
Table of Contents
